Summary of Elimination of the Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning:
Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning which is used for eliminate the accumulated carbon in auto engines.
Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning consumes water and electricity to create oxy-hydrogen gas which feeds into to the engine for cleaning the accumulated carbon and increasing the combustion efficiency of the existing fuel.
There is no pollution, no harmful gases or chemical additives to harm you, your engines or the environment. This type model is customized as clients' different Gas output demand.
Procedure for Performing Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning:
The engine is ready after normal operating temperature has been reached. The carbon cleaning process takes only 20 minutes. Connect the output from the CCS1500 to the engine's intake manifold (vacuum line).
Results of Carbon Cleaning with the OKAY Car carbon cleaning system / OxyHydrogen Generator for Automobile CCS1500:
Emission reduction rate
Comparison between OKAY Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning and traditional methods:
OKAY Car carbon cleaning system / OxyHydrogen Generator for Automobile
Chemical Drip Method
Chemical Foam Method
air pollution + waste water
Simple to connect;the engine runs at idle
The engine runs at idle while chemical additive drips into the engine
Complicated and repetitive; carbon removal incomplete.
Carbon Cleaning Process
Chemical DripEngine oilEngine oil filter
Chemical FoamEngine oilEngine oil filter
After using OKAY Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning CCS1500,carbon build-up is completely cleaned away,engine efficiency is increased,power and performance are restored,life expectancy is improved and engine emissions are reduced. The accelerator becomes light, horsepower is increased.
Reduce HC discharge (hydrocarbon) by 60.42%, CO 16.67%, CO2 20%. The fuel oil can be saved immediately by 10% and reach to 20% after running 500km. Do carbon cleaning one time every year, drive new car every day. It can prolong the engine life.
Our Okay Energy Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning can be used for
All Brand Cars,Example: BWM,Nissan,BENZ,Toyota....so on. Field work show:
Why use OKAY Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning :
1. High efficiency
--The results are more low RPM power in a smoother running and more efficient engine.
--Reduce HC discharge (hydrocarbon) 72%, reduce CO 96%.
After carbon cleaning, the accelerator becomes light, horsepower is increased, fuel oil can be saved immediately by 10% and by about 20% after running 500km.
2. Environment Friendly
Oxyhydrogen Generator uses water and electricity as material to create oxyhydrogen gas which feeds into to the engine for carbon cleaning. Different from the traditional carbon reducing methods:
--No medical component, no corrosion to auto parts, no any side effects.
--Does not generate hydrocarbons, carbon monoxide, or carbon dioxide.
3. Maximum Safety
--Steady, reliable fuel delivery.Fuel is available immediately after machine is switched on.No gas cylinder which can rupture or explode.
--Multiple safety devices, including overheating and in-sufficient water cut-off switches, will automatically turn off power to ensure the safety of both equipment and user.
4. High Mobility
Our Oxyhydrogen Generator come equipped with wheels to facilitate moving the generators to the job, not the other way around.Do not need to remove the engine, operation is quick, stop hidden danger caused by removing engine.
5. Easy Operation
--Do not need to change engine oil and engine oil filter element.
--Oxy-hydrogen carbon cleaning is full automatically process. The machine will remind and stop gas production when carbon cleaning finished.
--Carbon reduction results can be seen using a micro-camera,before and after the process.
6. Low Cost & Maximum Economy
--Save time and money.Oxyhydrogen gas is generated only using electricity and pure water. The cost of electricity and water reduces more than 40%,only need 20 mins time.
--Energy Saving more than 30% compared with traditional carbon reducing methods .
Unique Advantages of OKAY Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning :
1. The power supply:Inverter DC resonance power supply is made of imported IGBT power valve. The electrolysis is 30% higher efficiency and electrolysis current is stable and adjustable. It can long-term work 24-hours continuous.
2. Electrolysis Cell:It adopts large precise mould to integrated formed, prevent from explosion and leakage, work life is long. It is suitable for kinds of complicated working condition.
3. Heat dissipation system:Unique reasonable structured duct design radiation design and larger space of three-dimensional air flue for heat dissipation to ensures the radiation effect,meet the need of the work for 24 hours under high temperature of 40 degrees in summer.No need to cooling by water cycle.
4. Safe system:Safe system adopts multi-level swing type water seal design, detects and controls the safe water level automatically, perfect combination by multilevel wet-type flashback arrestor technology, automatic safety valve technology and dry-type fire resistance technologydry-type flashback arrestor, ensure 100% prevent from backfire.
5. Control system:Control water level and pressure automatically, exception catch setting, stabilize the pressure device.
6. Water and gas separation system:Gravity swing water and gas separation system, water vapor collection and backflow design, ensure that there is no mositure in the gas output pipe.
Unique 8 Systems Features of Okay Energy Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning compared with other manufacturers':
Okay Energy CCS1500 Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning
IGBT frequency conversion technology, conversion efficiency is as high as above 90%, stable and reliableto exchange AC turn to DC.
Silicon controlled rectifier or MOS tube rectifier technology, low efficiency to AC to DC. Unstable Current causes the gas production is not stable.
Integration formed electrolysis cell, no any gas and liquid leakage.
Adopts in Series, piece together way, there is one seal ring between each polar plate to prevent gas and liquid from leakage. Each electrolysis cell have dozens of sealing rings, the cell cannot work as long as there is one seal occur leakage.
Dynamic self-circulation electrolytic process, purifier is installed in electrolyte circulation pipeline, it can clean the electrolysis cell automatically.
Static electrolysis process, the cell is easy to be dirty, some of the manufacturers use dynamic electrolytic system, but there is no automatic cleaning filtering device.
4.Electrolysis polar plate
Special activity alloy material surface treatment, low overpotential and no leakage between the polar plates, the gas production efficiency is high.
Using the method of drilling in plate to realize the gas and liquid flow, these holes with gas and liquid flowing can cause leakage of currents, the gas production efficiency is low.
5.Moisture separation system
Centrifugal compulsive moisture separation device, can achieve Moisture separation 100%, and always keep blue flame.
Using gravity to do separation of moisture. It can’t do separation completely due to the hydrogen and oxygen gas flow fast. The cell temperature will rise after long time using, the moisture content will increase in oxy-hydrogen gas, then the flame will be red, flame temperature will be lower.
seamless stainless steel tube, no any rubber hoses absolutely, no gas or liquid leakage, ensures the safety and reliability
Using PU hose more or less to connect gas path.It will appear gas or liquid leakage phenomenon after a period of time in using or after backfire.
Adopt patented wet-type anti-backfire and dry-type flashback arrestor and automatic safety valve device, build in automatically decompression and recover device, prevent from backfire, no need reset by manual.
Adopt dry-type arrestor to prevent backfire, if backfire happens it needs to reset by manual. After several backfire, the rubber gasket in arrestor will damaged, flashback arrestor will lost effectiveness.
8.Heat dissipation system
Unique duct design and larger space for heat dissipation to meet the needs of the work for 24 hours under high temperature of 40 degrees in summer.
The internal device is installed close, less space for heat dissipation, bad cooling in summer. It will result in:(1) shut down automatically for thermal protection (2) moisture with gas to reduce the flame temperature, affect product quality.
Technical Parameters of Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning:
|AC Voltage Requirement (V)||380/220, 3phase|
|AC Current (A)||<15|
|Max. Gas Output(L/h)||1500|
|Max. Working Pressure (kg/cm2)||1.9|
|Max. Water Consumption (L/h)||1|
|Gross Weight (kg)||340|
|Dimensions - L*W*H (mm)||1140*760*1200|
Large High Efficiency Cleaning Carbon For Car / Cleaning Carbon for Automobile / Car Carbon Cleaning CCS1500