1, SPECIFICATION OF U/FTP/SFTP CAT7 Lan Cable 1) CONDUCTOR * Raw material of the conductor: solid bare copper * Conductor Dia.: 0.585±0.003mm (23AWG) 2) INSULATION * Raw material of the conductor: F-PE * Quantity:4 twisted pairs Blue/white-blue; Green/white-green; Orange/white-green; Brown/white-brown; * Insulation Dia. : 1.45±0.005mm * Average thickness: 0.4325 mm * Minimum point thickness: 0.43mm 3) TWISTED PAIRS SCREEN: Aluminum foil 4) SHEATH * Sheath material: LSZH or PVC * Nominal Dia.: 7.50 ± 0.2mm * Average thickness: 0.55mm * Minimum point thickness: 0.45mm 2. Mechanical Properties Conductor insulation material: halogen free Foam/Skin materialCable jacket material: halogen-free, flame-retardant materialApplication area: dray as well as humid roomsTemperature (moved): 0°C to 50°COperating temperature: -20°C to +60°CMin. bending radius for one-time bending: 4×O.D.Min. bending radius during installation: 8×O.D.3. Electrical properties Loop impendence: 130 W/kmHighest impendence difference: 2%Insulation resistance >5000 MW x kmImpendence Z0 at 1 500MHz: 100 W ± 15%Impendence Z0 at 1 350MHz: 100 W ± 18%Impendence Z0 at 1 600MHz: 100 W ± 25%Surface transfer impendence: < 100 MW per Meter at 10MHzEarthing symmetry db/BZL = 1000m > 46dB at 64kHzEarthing symmetry db/BZL = 100m > 40dB at 1MHzEarthing symmetry db/BZL = 100m > 20dB at 100MHzMutual capacitance: 43pF/mHighest earthing-coupling: 0,001MHz: 1000 pF/kmPropagation speed at > 10MHz (NVP*c): 0,79cSignal propagation delay >10MHz: 4,2ns/mSkew: <25ns/100m4. Transmission Properties: ( at 20°C)
|
SSTP/SFTP CAT7 Network Cable