composite hoses for gas 1.oil-resistant 2.acid-alkali resistant 3.high&low-temprature resistant 4.light, flexible and conven composite hoses for gasIt is a multi-layer thermoplastic hose made from Polypropylene, Polyethylene and Polyester films and Polypropylene fabrics, with a weather-proof and abrasion resistant outer cover made of Polymeric coated Polyester abric. Outer cover is also available in a special PU coated fabric; its UV, Ozone, Sunlight and weathering resistance, offers superior temperature and abrasion charactwieristics.

All the different layers are wrapped together and tensioned between internal and external wire spirals. This enables our product to meet the requirement of the Petrol-chemical industry and those of the oil tank truck industry.

 

WIRE:  Galvanised carbon steel inner wire (G)

          Galvanised carbon steel outer wire (G)

also available with 304 Stainless Steel internal or external wires 316 on request

COLOUR: Blue/Red/Black 

Applications
The capture and recovery of chemical and hydrocarbon vapors. This flexible, economical and lightweight hose complies with EN 13765-2003 .The transfer of many acids and alkalies, cloronated hydrocarbons, aromatic fuels, alcohols, and petroleum products. Service applications for the Vapour recovery hose include ships, barges, and marine terminals and also it can be used for vapor recovery in tank truck and railcar applications. Marine & Industrial.
Safety
The hose assemblies are tested at 1 ½ times rated working pressures for safety and reliability, in accordance with BS 5842:1980 clause 6.4(EN ISO 1402). Full test certification can be supplied on request. The working pressure is based on a safety factor of 4:1 Electrical continuity is achieved by the two wires bonded to the end fittings, this helps dissipate accumulated charge and to avoid static flash. The electric resistance of hose assemblies is less than 10 ohms,as required by BS 5842:1980 clause 6.2 (EN ISO 8031) ,with a special outer antistatic black cover
Work Temperature		-30~+100
MODLE	SIZE			Maximun W.P		Min Burst (ENISO 1402)		Bend Radius		Weight
	mm		Inch	Bar	PSI	Bar	PSI	mm	Inch	KG/mt	Lb/Ft
VGGP-0300L	75		3	10	150	40	600	200	8	2.5	1.7
VGGP-0400L	100		4	10	150	40	600	380	15.2	3.8	2.5

 

End Fitting: Males(BSP/NPT) \Females\ Flang(ANSI/DIN/GB)

Each hose assembly is permanently marked on the ferrule at one end according to EN 13765:2003

( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v1/233906218_1/composite_hoses_for_gas.jpg' , 'http://i00.i.aliimg.com/photo/v1/233906218_2/composite_hoses_for_gas.jpg' , 'http://i00.i.aliimg.com/photo/v1/233906218_3/composite_hoses_for_gas.jpg' , 'http://i00.i.aliimg.com/photo/v1/233906218_4/composite_hoses_for_gas.jpg' , 'http://i00.i.aliimg.com/photo/v1/233906218_5/composite_hoses_for_gas.jpg' , 'http://i00.i.aliimg.com/photo/v1/233906218_6/composite_hoses_for_gas.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); composite hoses for gas