3 Connectors USB2.0 AM to Micro Data Cable 1.1P*28#+2C*24# BC 2.3 Connectors AM to 2Micro5P 3.Black,0.2m 4.PC, Mobile phone

3 Connectors USB2.0 AM to Micro Data Cable

1P*28#+2C*24#+AEB

Connector:

AM 4Pin to 2Micro5P

Nickel plated connectors

Gold plated pin, 3u’, 6u’, 15u’, 30u’,50u’

Plugging Min. 5000 times

AM to AM, AM to Mini, AM to BM, AM to AF are available

Cable:

Construction: 1P*28AWG+2C*24AWG+ADB

Conductor material: Tinned Annealed copper

Conductor size: 28AWG+24AWG/28AWG+26AWG/26AWG+24AWG

Insulation: HD-PE (White & Green) & SR-PVC(Red & Black)

Shielding: Al-foil & 16*4/0.12mm Tinned annealed copper Braid

Jacket: PVC LY0004 60P

Outer diameter: 3.8/5.0±0.15mm

Printing: customized

Transmission performance:

USB 2.0 max data transfer rate 480Mbps Hi-speed cable

Electrical characteristics:

Power supply: +5V DC 500Ma from connected host USB

Insulation resistance: Min 100 ohm

Voltage resistance: 500V DC, 60Hz 0.02 second

Contact resistance: Max 3 ohm

Working environment:

Operating temperature: 0°C--50°C

Storing temperature: -40°C--55°C

1.Voltage Rating		30V (rms) Max. The length of Testing cable: 3.8m
2.Conductor Resistance		Gauge		28			26			24		22			20
		W/M		0.232			0.145			0.089		0.057			0.038
3.Unbalance Resistance		£5%
4.Impedance		76.5W~103.5W (TDR Differential)  30W±30% (TDR Common)
5.Attenuation	Frequency (MHz)	0.512	0.772		1	4		8	12		24		48	96		200	400
	Att. (dB)	-0.13	-0.15		-0.20	-0.39		-0.57	-0.76		-0.95		-1.35	-1.9		-3.2	-5.8
6.Propagation Delay		Fully rated twisted signal pair must be equal to or than 26 ns. Frequency range of 1-400 MHz.
7.Skew		The propagation delay of two signal wires skew £100ps(TDR Single ended)

3 Connectors USB2.0 AM to Micro Data Cable