1.HDMI connector male fan type scope:
a.Content
This specification is designated the Performance, Tests and quality requirements for High-Definition Multimedia Interface(HDMI) serial Connector.Used High-Definition Multimedia Interface(HDMI) connector.
b.Design and Construction
Product shall be conformed the Design, Construction and Physical dimensions.Shown as product drawing.
2.HDMI connector male fan type material
Connector
Contact :Copper Alloy ,Selective Gold Plating over Nickel in Contact Area and Tin/Lead over Nickel at Soldering Area.
Terminal :Copper
Housing Hign Temperature Thermoplastic,UL94V-0 rated.
BodyUL94V-0 rated.
Shell:Copper Alloy or SPCC ,Solderable Nickel plating or Gold plating
3.HDMI connector male fan type
Ratings
Current Rating:0.5A DC Max.
Rated current:0.5A
Voltage Rating:40V AC/DC(RMS)
Rated voltage:AC/DC 40V
Operating temperature :-25°C ~ +85°C
Working temperature:-25°C ~ +85°C
4.HDMI connector male fan type scope examination of product
ITEM | TEST DESCRIPTION | REQUIREMENT | PROCEDURE |
| Visual Inspection Refer to ANSI/EIA-364-18 | The inspection results should be compliant with the individual specification. | Before the qualification test, all these components shall be examined the Features, Construction as per applicable specification and documents. |
5.HDMI connector male fan type electrical performance
ITEM | TEST DESCRIPTION | REQUIREMENT | PROCEDURE |
5-1 | Low Level Contact Resistance(Contact): PIN):Refer to: ANSI/EIA-364-23 | 50 milliohms max. | Mate connectors: Measure by dry circuit, 20mV maximum, 10mA maximum. |
5-2 | Low Level Contact Resistance(Shell): Refer t ANSI/EIA-364-23 | 50 milliohms max. | Mate connectors: Measure by open circuit, 5V maximum, 100mA maximum. |
5-3 | Insulation Resistance Refer to ANSI/EIA-364-21 Method 302 cond. B | 100 Mega ohms minimum(unmated) 10 Mega ohms minimum(mated) | Mated connectors, Apply 150Volts DC between adjacent terminal.(500Volts for unmated) |
5-4 | Dielectric Withstanding Voltage Refer to ANSI/EIA-364-20 Method 301 | No breakdown. | Unmated connector, apply 500VoltsAC(RMS.) for 1minute between adjacent terminal. |
6.HDMI connector male fan type mechanical performance
ITEM | TEST DESCRIPTION | REQUIREMENT | PROCEDURE |
6-1 | Terminal/Housing retention force | 0.40kgf/Pin Min. 0.40kgf | Measure the contact retention |
6-2 | Insertion Force & Withdrawal Force Refer to ANSI/EIA-364-13 | Insertion Force:4.50kgf Max. Withdrawal Force:1.00kgf Min. | The specimen is mounted to mounting fixtures by the normal mounting means.The peak force shall be recorded at the maximum rate of 25mm per minute |
6-3 | Durability Refer to ANSI/EIA – 364 – 09 | After 10000 cycles test, shall be no evidence of mechanical or ecectric defects, and shall meet the requirements of connector using. | 10000 insertion/extraction cycles at a maximum rate of 100±50 cycles per hour.s. |
7.HDMI connector photos and drawings
displayport DP connectors