Ads by Google
The CEE KHT-24/630-J Shielded Sub-Connector is shielded and insulated termination, rated 630 amps, up to 24kV, connected with underground cable ranging from 35 to 400 mm2 (conductor cross section). It meets the requirements of DIN 47636 Standard.
The CEE KHT-24/630-J Shielded Sub-Connectors are molded using high quality peroxide-cured EPDM insulation. It is used to connect underground cable to switchgear, RMU and 630 amps junctions equipped with deadbreak bushings. The Shielded Sub-Connectors are designed for used on solid dielectric cable (XLPE or EPR).In order to provide more cable branch circuits, the Shielded Sub-Connectors can be connected with the CEE KQT-24/630-J Shielded Sub-Connector or the CEE KQT-24/630-J Shielded type π Sub-Connector by connecting plug.
The test point is available for use with hot line voltage indicators. As a alternative application, he Shielded Fore-connector can be mated with the type CEE KBLQ-17/45 surge arrester for over-voltage protection.
Cable Insulation Range use for Part Number CEE KQT-24/630 CEE KHT-24/630 CEE KQT-24/630-J CEE KHT-24/630-J | Cable Adapter Code | Cable Insulation Range | |
Inches | mm | ||
A | .37~.47 | 9.5~12.0 | |
B | .45~.55 | 11.5~14.0 | |
C | .53~.65 | 13.5~16.5 | |
D | .61~.73 | 15.5~18.5 | |
E | .71~.83 | 18.0~21.0 | |
F | .79~.91 | 20.0~23.0 | |
G | .87~.98 | 22.0~25.0 | |
H | .95~1.06 | 24.0~27.0 | |
I | 1.02~1.18 | 26.0~30.0 | |
J | 1.10~1.26 | 28.0~32.0 | |
K | 1.22~1.34 | 31.0~34.0 | |
L | 1.30~1.42 | 33.0~36.0 | |
M | 1.38~1.54 | 35.0~39.0 | |
| 630Amp Deadbreak Connectors | ||
| Main Technical Parameter | ||
| Standard Voltage Class | 24kV | 36kV |
| Standard Current Class | 630A | 630A |
| Max. Rating Phase-to-Phase | 12kV | 18kV |
| BIL and Full Wave Crest | 125kV | 170kV |
| AC 60/50Hz 1Minute Withstand | 54kV | 81kV |
| DC 15 Minute Withstand | 48kV | 72kV |
| Minute Partial Discharge | ≤10pc@20kV | ≤10pc@30kV |
630A,24kV Shielded Separable Connector, Separable Elbow Sub-connector, EPDM rubber, 110303