1, Exothermic weld 2, Safety and high-effectivity 3, Each piecepacked by vacuum aluminum-plastic bag 4, Official test report

Exothermic weld Powder

Product Introduction:

Exothermic welding are fused under the high temperature caused by the alumino-thermic reaction to realize the high quality weld connector. the alumino-thermic reaction is carried out in the hight temperature resistant graphite CADweld Mold, In normal conditions, more than 100points can be welded  with same mould and the reaction duration will spend about 4-5 seconds only.

Advantages of our weld flux:

1, the operation is safe and no need for professional skill or special protection, so it is quite easy.

2,No external power or heat is required, tools and equipments are simple, and operating efficiency is high.

3,The purity of welded point is more than 97%,so it has high conductivity and anti-corrosion.

4,Does not loosen as the connection create a permanent molecular bonded.

5, Current carrying capacity of welded point is stronger than wire.

6,This method used widely and applicable for weld between coppers, copper and steel, copper and galvanized flat steel etc.

7, The welded point can bear strong impact of the surge current for several times.

How to make an Exoweld connection? four steps:

Exothermic Weld Powder