Category Wire to Board Crimp style Connectors
Type Disconnectable type
Crimp style, Thin type
*The dimple at the center of the contact ensures positive contact and low contact resistance at all times.*The contact has a long wire strip holding length of 2.6 +/-0.4mm.*Fully shrouded header*The same shrouded header can be used for the KR/KRD/CR insulation displacement connectors.
Specification |
Pitch | 2.0 mm | Current rating | 2A (AWG#24) | Voltage rating | 100V | PC boardmounting direction | Top entry, Side entry | Compliant with RoHS.(LF)(SN) as identification part number shall be displayed on a label.When ordering RoHS compliant products, please inquire to the nearestJST Sales Office, or order them with the described part number adding(LF)(SN) as the identification marking after it. |
JST CONNECTOR PHR-6 PH connector ,Crimp style, Thin type