Welcome to ECVERY
USB-SA124B Spectrum Analyzer
USB-SA124B Spectrum Analyzer
Supplier Info
[China Supplier]
Contact Person : Ms. Peng Ava
Tel : 86-25-52635773
Fax : 86-25-52635773
Product Detail
USB-SA124B Spectrum Analyzer 1.Write automated testing &/or data collection applications with included API 2.general lab used

The Signal Hound USB-SA124B is a USB-based,100 kHz to 12.4 GHz, economy spectrum analyzer and measuring receiver. Using recent innovations in RF technology, the Signal Hound has the sensitivity,accuracy and dynamic range you’d expect in a unit many times its cost. The Signal Hound is powered from the USB cable, eliminating the need for a separate power supply. Measuring less than 8 inches long and weighing only 12 ounces, the Signal Hound can be used virtually anywhere!The Signal Hound® graphical user interface, or GUI,is used to communicate with the Signal Hound,sending commands and receiving data over the USB. The user sends commands using the control panel and menu. The data is streamed back to the PC over the USB and displayed on the graticule as a signal trace. For precision measurements, markers may be used as well.

The perfect tool for general lab use, electrical engineering students, ham radio enthusiasts, and electronic hobbyists alike.Write automated testing and/or data collection applications with included API that is Windows®-based and Matlab®/LabVIEW® compatible. A Linux®-based API is also included.Use as a down-converter with a 63 MHz IF Output and a 6 MHz Resolution Bandwidth.Use over the entire 0°C to +50°C Operating Temperature Range without the need to de-rate published specifications.

USB-SA124B Spectrum Analyzer & Measuring Receiver Specifications

Frequency:Frequency Range: 100 kHz to 12.4 GHzTimebase: 10 MHz reference in and outInternal Frequency Reference Accuracy: ±1ppm (standard); 1 x 10-7 (option-02)Resolution Bandwidth: 1 Hz to 250 kHz and 6 MHz

Amplitude (RBW ≤100 kHz):Range: +10 dBm to Displayed Average Noise Level (DANL)Absolute Accuracy (0dB to DANL): ±1.5 dB (100 kHz to 6 GHz)                                                              ±2.5 dB (6 GHz to 12.4 GHz)

Displayed Average Noise Level (dBm/Hz):100 kHz to 10 MHz                            -147 dBm10 MHz to 100 MHz                           -151 dBm100 MHz to 3.0 GHz                          -152 dBm3.0 GHz to 5.5 GHz                           -145 dBm5.5 GHz to 7.0 GHz                           -149 dBm7.0 GHz to 8.0 GHz                           -147 dBm8.0 GHz to 11.0 GHz                         -134 dBm11.0 GHz to 12.4 GHz                       -129 dBm

Residual Responses (RBW = 6.5kHz):100 kHz to 10 MHz                       -100 dBm10 MHz to 8.0 GHz                        -93 dBm8.0 GHz to 11.0 GHz                     -82 dBm11.0 GHz to 12.4 GHz                   -85 dBm

SSB Phase Noise at 10 GHz (Typical):Frequency Offset                    dBc/Hz100 Hz                                         -721 kHz                                            -8010 kHz                                          -87100 kHz                                        -871 MHz                                          -110

Measuring Receiver: (Typical after 30 min warm-up and ±3°C of ref. start temp.)Operating Frequency: 100 kHz to 12.4 GHzModulation Measurement Accuracy: ±1% for AM and FMSynchronous Level Detector: ± 0.25 dBc (+0 dBm to -127 dBm, 100 kHz to 1.0 GHz)                                                     ±0.25 dBc (+0 dBm to -117 dBm, 1.0 GHz to 6.0 GHz)                                                     ±0.25 dBc (+0 dBm to -102 dBm, 6.0 GHz to 12.4 GHz)

IF Output:63 MHz with 6 MHz bandwidth for down conversion of NTSC, PAL, SECAM, ATSC,and DTV formatted signals

Calibration Interval: 1-year

Operating Temperature: 0°C to +50°C without de-rating specifications

System Requirements:Correction data is now stored in the USB-SA124B hardware, eliminating the need for retrieval from the internet. The Signal Hound Graphical User Interface, or GUI,is compatible with Windows XP® and Windows®7 operating systems. You musthave at least 1GB of free disc space, 1GB of RAM, two adjacent USB 2.0 ports,and a minimum of an Intel® Core™ i3 processor or equivalent. Netbook computers with an Intel® Atom™ N450 processor, or higher, can be used with minor limitations.

USB-SA124B Spectrum Analyzer

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.