3000kSCD200/200TD/270TD Description Model:H002 Brand:JIUYColor:red/gray/buleSize:3.8x1.5x2.5mWeight:3000kgSpec:SCD200/200TD/270TDDescription:Description: Construction Elevator Wikipedia card Construction elevator often referred to as construction lifts, but the construction of lifts, including a broader definition, construction, construction elevator platform also belongs to series. Is a simple construction elevator car, drive mechanism, the standard section, with a wall, chassis, fences, electrical system, composed of several parts, is often used in building construction machinery manned cargo, because of its unique structure of the box The ride up a comfortable and safe, construction elevator on the site with the tower crane is usually used, generally in the 1-5 tons of load, running speed 1-60M/min. Directory Construction elevator Construction Elevator Key Features: Construction lift safety rules 1 Subject Matter and Scope 2 Normative references 3 safety requirements for the design of metal structures 4 basis Stop layer 5 Construction elevator Construction Elevator Key Features: Construction lift safety rules 1 Subject Matter and Scope 2 Normative references 3 safety requirements for the design of metal structures 4 basis Stop layer 5 Edit this paragraph to start construction of the elevator Also known as building construction hoist construction elevator is often used in building construction machinery manned cargo, because of its unique box structure to take up comfort and safety, construction elevator on the site with the tower crane is usually used, generally 1-3 tons of load, running speed 1-60M/min. Construction of many different types of lifts, according to whether the operation mode from there on the weight of the weight and two, its control into manual control mode and the automatic control mode. You can also add the necessary frequency device and PLC control module, in addition to calling device can be added floors and leveling devices. Construction construction lift principle, features: lift workers to adapt to the bridge, chimney construction and other needs of tilt, which according to building shape, the tilt frame rails to install and maintain the level of hoists, rack rails running along the slope. Alpha Chongqing Construction Machinery Co., Ltd. is specialized in manufacturing construction elevator company. Edit this paragraph the main features of the construction of lifts: Drive cage placed in the top side, reducing the cage noise, so that cage clearance increased, but also to make the drive more stable, smaller body vibration, no on the re-design simplifies the installation process; a machine, in the traditional installation of elevators based on the construction of reinforced concrete delivery devices and delivery devices can be delivery of steel, concrete and construction workers, greatly improve the construction efficiency; optional performance of advanced stepless frequency control system, so the lift can achieve 0 ~ 60m / min, stepless speed regulation, smooth operation without impact. More change attachment system, allows the unit to use buildings in the complex. SSE200-B-type main features of the construction of lifts: SSE200-B-type construction hoist, high efficiency, applicability, manifested in: 1, lift carrying two tons of building materials or passages 20, carrying capacity and high efficiency. 2, the cage area of 9.54 square meters, which can load 6 sets of carts, work large area. 3, a manual and automatic dual operating system, easy to use. 4, camera surveillance and intercom system, lifts running video see, you can call. 5, drive power, running speed and high efficiency. 6, zero, parts interchangeability, passenger and cargo dual machine part machine parts with GM, to facilitate the manufacture, use and maintenance. SSE200-B-type construction lift safe and reliable, in: 1, equipped with high-performance electromagnetic brake, speed brakes, broken rope protect the brakes complete, comprehensive security protection devices. 2, run high, low and stop layer open the door with electrical interlock device. 3, overload sensing agencies, display overload, prevention of accidents. 4, double-column guide positioning and stability. 5, two wire rope load, high safety factor. SC200/200 Construction Elevator-type main features: 1, protection devices, advanced, configuration, anti-national patent technology falling safety device, the reliability of the first among similar products; 2, the drive unit placed in the cage top side bearing cage space large; 3, a three-drive structure, carrying a large quantity; 4, the attachment device of a solid, safe and reliable; 5, small footprint, only 24 square meters; 6, smooth transmission, vibration, ride comfort; 7, lightweight structure, maintenance and easy accessibility. General construction quality and reliable lift the European introduction of electrical components, using a foreign name-brand manufacturers of bearings, oil seals and other mechanical parts; steel with high-quality steel, shaped by the semi-automatic gas shielded welding. Steel surface according to user requirements for phosphating paint or hot galvanized. Cage may be based on the requirements of decorative aluminum wire mesh or punching. Construction Elevator tilt Overview: This series of lift no heavy, guides to install according to the construction needs of the tilt (guides lead weight line with the angle between the axis of ≤ 10o), but the cage floor is always parallel to the horizontal. With wall support with variable section and screw to adjust to different length of the channel with the requirements of the wall (attached to the wall the maximum distance 12m), dual-drive transmission with parallel transmission of two or three available forms can be cab cage with or without cab. Main technical features: tilt construction elevator to meet the bridge, chimney and other construction needs of tilt, which according to building shape, the tilt frame rails to install and maintain the level of hoists, rack rails running along the slope. The following guide frame can be inclined at 12o range of installation (greater than 12o to be customized); not on the weight system, operation is simple, convenient and reliable installation and removal; hoists, rail racks, and other structures attached to the wall system designed by computer finite element analysis, force structure in good condition; cage two drives, high efficiency transmission, starting, braking smooth and reliable; set ten safety limit, and a single gear safety devices and safe; using the new cable traction and with dense rack cable protection, cable accompanied by a more reliable; maximum height of 150 meters set by increasing the standard section type may be increased to 250 meters; main electrical control components adopt imported parts, high reliability. Technical characteristics of multi-functional building hoist: SC200/200DMK and SC200/200BM versatile construction hoist (hereinafter referred to as multi-function ladder) is to conform to the current power plant cooling towers, chimney construction requirements of new products specifically developed. It is adapted construction efficient, fast, economic, and security requirements, so the use of a machine, which can transport steel, concrete and construction workers, three in one type of equipment, greatly facilitate the construction business, to avoid the equipment repeat purchase, saving money. Features: drive cage placed in the top side, reducing the cage noise, so that cage clearance increased, but also to make the drive more stable, smaller body vibration, no on the re-

building hoist