ISO9001 rubber belt conveyor system: 1.simple structure 2. advanced technology 3.Easy to maintain 4.Large capacity

ISO9001 rubber belt conveyor system introduction Conveyors Belts consists of two or more pulleys which are powered, moving the belt and the material on the belt forward. conveyors belts is widely used in mining, metallurgy, coal and other industries. According to different transferring requirements, the transferring system can be of only one belt conveyer or consists of several conveyors, or combined with other transferring equipments. The conveyors belts can be installed horizontally or aslope to meet the needs of different transferring requirements.

A typical conveyors belts consists of the following components: outrigger, drive, loop belt dispenser, tensioning station, supporting structure (line) and turning station with a charging hopper. Dual whales conveyors are available in three supporting structure versions, with the line set on the floor or suspended. Other components are selected depending on intended loads, length and angle of inclination.

ISO9001 rubber belt conveyor system Application

Conveyors belts consists of two or more pulleys which are powered, moving the belt and the material on the belt forward. conveyors belts is widely used in mining, metallurgy, coal and other industries. According to different transferring requirements, the transferring system can be of only one conveyors belts or consists of several conveyors, or combined with other transferring equipments. The conveyers belts can be installed horizontally or aslope to meet the needs of different transferring requirements.

Conveyors belts is widely used in mining, metallurgical and coal industry to transfer sandy or lump materials, or packaged materials. The transfer system can be one single or multi-conveyors or combined with other transfer equipments according to various transferring requirements. And conveyors belts can be installed horizontally or aslope to meet the needs of different transfer lines.

ISO9001 rubber belt conveyor system Operating Note

1.The size of stone must be moderate, can not be too big

2.Production should be uniform

3.According to stone, use the different conveyor belt

4.According to the angle, adjusting transmission speed

ISO9001 rubber belt conveyor system conveyors belts

Model	Capacity(t/h)	Roller diameter(mm)	Power(kw)
Ds500	40-232	500.600	1.5-30
Ds650	57-391	500.630	1.5-45
Ds800	118-824	500.630	2.2-7.5
Ds1000	230-1233	500.630.800	4-100

ISO9001 rubber belt conveyor system