Heavy load corrugated cleated sidewall rubber conveyor belt,increase the conveyance capacity to 4 times.Heavy load.

    Heavy load corrugated cleated sidewall rubber conveyor belt

 

Our Sidewall Conveyor Belt is good in quality and competitive in price. We are manufacturer and supplier of Sidewall Conveyor Belt following your specific requirement. 

Characteristics 

1) Increase the conveyance capacity to 4 times in comparison to regular conveyor belts.

2)  Obliquity can be changed while conveying

     Save installation space by increasing the angle of inclination up to 90°

3)Protect the conveyed products with solid cleats mounted on the belt.

4)Heavy load, slip resistant

Baseband:

Baseband is consisted of upper rubber,lower rubber,core and transverse rigid layer.Upper rubber thickness is 3-6mm,the lower rubber thickness is 1.5-4.5mm.The core supports tensile force,the core

are:Cotton(CC),Nylon,EP.To improve the transverse rigid ability,it has added special reinforced layers in the core,named transverse rigid layer.Baseband has the same width with common belt.

Cleat:

The cleat is produced by fiber load materials.With large anti-shock ability and impact resistance,thus avoid the distortion of stress.The cleat has T,TS,C,TC,TCS five types.TS and TCS types are mosaic pattern.The conveyor angle is small than 40°,using T or TS cleat;the conveyor angle is bigger than 40°,using C,TC or TCS cleat.

     

 

Characteristics:

 

1. To save time

Because of large angle transporting,thus can be shortened the horizontal length and save the space of laying area.

 

2. Strong transporting capacity

Compared with common conveyor belt,with large carrying cross section,has stronger transporting capacity than same width conveyor belt.

 

3.Without sidewall plate

 

Because without sidewall plate,thus avoid the local abrasion.

 

4. Impossible to use small roller

 

Impossible to use the traditional size of small roller.

 

5. Because the baseband uses special canvas core to improve the canvas,then improve the anti-broken ability of belt at the same time.

 

6. The sidewall plate and diaphragm are adhesive with baseband through heat vulcanization method,thus ensure the bonding strength.

Application:

Suitable for conveying powdery and massive materials can work with an obliquity from 0-90C.

SOMETHING ABOUT US

heavy load corrugated cleated sidewall rubber conveyor belt