Conveyor Idler Roller 1.1.Dia 60-219,length190-3400 2.Used in mining,cement,steel,harbor,etc 3.Standard:ISO,CEMA,DIN,JIS The quality standards of our Conveyor Idlers conforms to IS : 8598-1987. We also proffer industrial conveyor idlers which are designed to diminish roller gap which maximize the life of belts. Our conveyor idlers are easy to mount and its design smooth the process of roller removal. SALIENT FEATUREConforms to IS:8598-1987. Minimum roller gap to maximise belt life as it eliminates danger of pinching and damaging belt. Forward tilt of side rollers ensures proper belt training. Drop in type' design facilitates easy mounting and removal of rollers.FRAME Jig welded steel frame ensures precise roller alignment and inter changeabality. Inverted angle base provides strength, and directs spillage away from rollers thus preventing accumulation of material under roller, ensuring free runing of roller without any power loss. Foot straps each with two open end slot facilitate initial alignment of belt.ROLLER Roller shell is made of special ERW tubes with close tolerance. Bearing housings pressed out of CRCA steel sheet are welded to the roller shell with the help of Co2 welding machine to achieve least distortion and maximum strength. All rollers are made free before despatch. Close tolerance solid shaft protects bearings by minimising deflection. Rollers are fitted with seize resistant ball bearings. These bearings are specially designed for Belt Conveyor applications. Double multilabyrinth seals ensures maximum protection against dirt, dust and moisture to the bearings. Bearing, seals and grease chambers are filled with high grade lithium based grease and rollers are sealed for life, thus saving high maintenance cost during life of roller. 

Impact Idler