Welcome to ECVERY
copper foil tape for shielding
copper foil tape for shielding
Supplier Info
[China Supplier]
Contact Person : Mr. qiyang yuan
Tel : 86-510-85181198
Fax : 86-510-85190502
Product Detail
1 good quality and cheap price 2 suface coating: polyester one or both side 3 length:1000m,2000m 4 width:15 to 400mm

  copper copolymer lamination tape,copper plastic composite tape,copolymer coated copper strips, copper plastic composite strip,laminated copper tape,copper PE coated belt,copper belt laminated with PE

ET-20S consist of a copper tape coated on single side with an special ethylene copolymer color-coded green.

The coating forms a strong moisture-resistant bond to the copper substrate that will not delaminate from contact with the copper.

The coating also from strong polymeric bonds to zero halogen,polyethene and chlorinated polyethylene jacketing resins during the jacket extrusion process thereby allowing fabrica-tion of bonded jacket or laminate sheath,cables.

The products requirs a lot melt in the overlap to form the seal that provides a moisture/chemical barrier to the cables core.the copper is fully annealed which has high conductivity and easy fabrication characteristics.

ET-20S lamination tape mainly use as sheath for medium and high voltage power cables, or as the combination shield/moisture barrier over a wire or tape screen.

Benefit/advantages

1 lead replacement

2 chemical/moisture barrier to eliminate treeing

3 enhanced short circuit capability

4 enhanced side wall pressure,crush and impact resistanc

5 superior bend performance with increased resistance to buckling and kinking

6 corrosion protection

7 elimination of shrinkback of plastic oversheath

copper foil tape for shielding

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.