Protable laser partical counter electronic laser counter

1. Main Technical Parameters

(1) Particle size channel                          0.3,0.5,1,3,5,10(um)

(2) Sampling period                                1~10mins

(3) Number of sampling point          2~9

(4) Sampling frequency                           2~9

(5) Sampling quantity                   2.83L/Min

(6) Self-purification time                         ≤10 Mins

(7) Self-deciding cleanness grade     grade 100 ~ grade 300,000

(8) Transfinite warning function            The instrument can set up the transfinite warning of five grades of grade 100, grade 1000, grade 10,000, grade 100,000, and grade 300,000

(9) Counting mode            automatic, manual

(10) Communication interface          RS232,9600 baud rate

(11) Volume                                       173×100×230 (width × height × depth) (mm)

(12) Weight                                       2kg

Operating Instructions

(1) Turn on the power supply switch, and first preheat for 1-2 minutes.

(2) When measurement is over, don’t turn off the machine immediately, insert one end of the self-purification tube in the self-purification device, and insert the other end in the sampling port, when the 0.5um display figure approaches 0, turn off the power supply. Then pull off the self-purification tube from the self-purification tube port, and screw on the cap.

(3) When the instrument is charged, the instrument should be kept in the “off” state, when the indicating lamp on the charger is “red”, it indicates the instrument is being charged up; when the charger indicating lamp is “green”, it indicates the instrument battery has been fully charged.

(4) Finally, place the instrument in a relatively clean environment.

Dear buyer;

  If you are interested in our products.Please feel free to contact us!

Protable laser partical counter electronic laser counter Protable laser counter