Ads by Google
Process counter, electronic counter, digital timer, digital multi-function counter Features:
* Multi-function, counting/ length counting/batch counting/ timing
* Dual line 6 digit display
* With counting up/ down, timing function, 8 kinds of output modes
* Selectable input signal pulse width
* Thickness only 64mm, sae installation sapce
* Panel size: 4: 48WX48HX90L 7: 72WX72HX90L
* The same function as Autonics counter
* Can support most sensors & encoder
Ordering code
Model | Panel size | Display digit | Batch output | Alarm |
CT3-MB61(CT6Y) | 3: 36HX72W | 6 | NO | 1 |
CT4-MB62(CT6Y-2P) | 4:48HX48W | 6 | NO | 2 |
CT7-MB61(CT6S) | 7:72HX72W | 6 | YES | 1 |
CT7-MB62(CT6S-2P) | 6 | YES | 2 | |
CT8-RC62(CT8-2P) | 8:48HX96W | 6 | YES | 1 |
CT8RB61(CT8) | 6 | YES | 2 |
Technical Specification
Power supply | AC100-240VAC 50/60Hz 24V power supply can be ordered | Data storage | 10 years |
CPS of INA, INB | 1cps, 30cps, 1kcps, 5kcps, 10kcps selectable | Sensor power | Below 12VDC±10% 100mA |
Input pulse width | Reset input: 1ms or 20ms selectable | Temperature | -10°C~50°C |
INA, INHIBIT, RESET, BATCH RESET, 1ms or 20ms selectable | Relay capacity | NO: 250VAC 3A Impedance | |
Input | To select voltage input or non-voltage input. Voltage Input: input impedance is 5.4 KΩ, H is 5-30VDC, L is 0-2VD Non-voltage input: short circuit impedance is max. 1 KΩ, residual voltage is max.2VDC, open impedance is min.100 KΩ | NC: 250VAC 2A Impedance | |
One-shot output | 10/20/100/200/500/1000/2000/5000ms | SSR capacity | Max.30VDC, 100mA |
CT8 Series Digital Preset Counter / Timer with Sensor or Encorder