Ads by Google
SAN Laboratory Ceramics
Glazed with a layer of corrosion resistance material on top of a substrate mixed with Kaolin, blue porcelain clay and feldspar, SAN Laboratory Ceramic is cured in the oven at 1250°c for enough long time.
SAN Laboratory Ceramics withstand extreme temperature of 1500°c and will not blister or crack. When heated, they do not change or emit poisonous fume.
SAN Laboratory Ceramics are the best performing material of laboratory worktop in the market, which resist any chemicals used in laboratories except hudrofluoric acid.
The surfaces of SAN Laboratory Ceramics withstand scratches of any stiffness except carborundum. It presents excellent performance in the test of impact.
SAN Laboratory Ceramics will not decolor or face out due to UV lingt. They are duable and last long.
SAN Laboratory Ceramics are non conductive, have best insulation performance, especially applicable applicable in laboratories of electronics and power plants.
The length of SAN Laboratory Ceramics within 1.5m will not warp more than 3mm, which is similar to glass. The good flatness will eliminate the trouble from fabrication and instaalation.
Glazed with a layer of corrosion resistant material, SAN Laboratory Ceramics are non-porous and excellent for ease of decontamination, stay away formany bacteria atttack.
SAN Laboratory Ceramics contain no poisonous materials, will not ignite or radiate, are non conductive, and will not produce noxious gases while heated.
SAN Laboratory Ceramic worktop