1.low use and maintenance costs 2.high ratio of reduction 3.high reliability 4.small power consumption

 PE Series Jaw Crusher

Summarize

 

Jaw crusher is sutiable for crushing hard material (compression strength less than 250Mpa). For example: coarse and fine crushing operation of iron ore, slag, phosphorus ore, copper ore, silicon ore, limestone, quartz stone, ceramic and solid materials with similar  hardness; breaking bulk materials of concentrator, stones factory, cement plant. Features: low use and maintenance costs,high ratio of reduction, high reliability, small power consumption. Be widely used in mining, building stones factory, building materials, metallurgy, ceramics and other industries

 

Working principal

 

The motor drives the belt wheel, and makes the move jaw up and down by eccentric shaft. When the movable jaw rises, the angle between the fixed jaw and movable jaw gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw down, the angle between the fixed jaw and movable jaw gets smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing  cavity.  

 

 

Specifications

 

 

Mode	Feeder-mouth size(mm)	Feed size(mm)	Output(t/h)	Power	Discharge size(mm)	Overall Dimensions(mm)	Weight(t)
PE-400×250	400×250	210	5-20	15	20-60	1450×1315×1296	2.8
PE-400×600	400×600	340	16-65	30	40-80	1565×1732×1586	6.5
PE-500×750	500×750	425	45-100	55	50-100	1890×1916×1870	10.1
PE-600×900	600×900	500	50-120	75	65-120	2305×1840×2298	15.5
PE-750×1060	750×1060	630	115-210	90	80-140	2730×2472×2800	32
PE-900×1200	900×1200	750	140-260	110	95-165	3335×3182×3025	50

 

 

 

 

 

Jaw crusher PE 400*250 For ore,quartz stone,ceramic and solid material