Jaw Crusher-PE series Application:
Kunte jaw crusher consists of rack, eccentric shaft, lager pulley, flywheel, moving jaw, side guard plate, bracket, bracekt back seat, adjustable gap screw, return spring, fixed jaw plate, movable jaw plate and so on.
Jaw crusher is used for all kinds of ores and the medium sized broken of large materials that roken compressive strength less than 320 Mpa. Jaw crusher is divided into coarse broken and fine broken.
Our company surpply PE and PEX series jaw crusher and complete in specifications, jaw crusher is the preferred equipment for primary crushing.
Jaw Crusher Features:
1.Energy-saving: stand-long energy saving 15%-30%, energy saving more than double.
2.Absorbing world-lever technology,chooseing good raw matrial to manufacture and assemble.
3.Convenient to adjust the discharge part
4.Low noise and less dust.
5.High crushing ratio and partical size is uniform.
6.Stable, reliable operation and high efficiency.
7.Special tooth designing make jaw plate longer and enhance the capacity.
8.Finite element analysis technology to make crusher more stronger.
9.Low-carbon and environmental protection
Kunte Jaw Crusher Working Principle:
The jaw crusher is the type of moving extrusion.
The motor drive the belt and the pulley, let the movable jaw move up and down by the eccentric shaft; when the movable jaw move up, the angle between bracket and eccentric shaft became larger to pull the movable jaw plate to close the fixed jaw plate, the material is broken, twisted and grinded at the same time.
When the movable jaw move down, the angle between bracket and eccentric shaft became samaller, the movable jaw plate leave the fixed jaw plate according to the action of pull rod and spring, the broken material is discharged by the discharge gate at the same time.
1. Body
2. Swing jaw
3. Stationary jaw
4. Fly wheel
5. Upper side plate
6. Lower side plate
7. Stationary jaw kipper plate
8. Stationary jaw holding stud
9. Product flats
10. Swing jaw gard plate
11. Swing jaw kipper plate
12. Swing jaw shaft
13. Swing jaw shaft bearing
14. Jaw plate
15. Eccentric shaft
16. Eccentric shaft bearing
17. Pitman
18. Toggle plate
19. Toggle pin
20. Toggle spring cap
21. Toggle spring
22. Rubber diafarm
23. Half round (Toggle brass)
24. Pull back rod
25. Pull back rod spring
26. Rod spring cap
27. Oil in
28. Oil out
Jaw Crusher Specification:
PE series for coarse broken
PEX series for fine broken
Model | Feed Opening(mm) | Max Feed Size(mm) | Discharge Size(mm) | Capacity(t/h) | Speed(r/min) | Motor Power(kw) | Weight(t) | Dimension(length,width,height)(mm) |
PE-150x250 | 150x250 | 125 | 10-40 | 1-3 | 250 | 5.5 | 0.8 | 720x660x850 |
PE-200×300 | 200×300 | 180 | 15-50 | 2-6 | 260 | 7.5 | 1.2 | 910×750×990 |
PE-200×350 | 200×350 | 180 | 18-70 | 3-10 | 260 | 11 | 1.5 | 1000×870×990 |
PE-250×400 | 250×400 | 210 | 20-60 | 5-20 | 300 | 15 | 2.8 | 1300×1090×1270 |
PE-400×600 | 400×600 | 340 | 40-100 | 16-60 | 275 | 30 | 7 | 1730×1730×1630 |
PE-500×750 | 500×750 | 425 | 50-100 | 40-110 | 275 | 55 | 12 | 1980×2080×1870 |
PE-600×750 | 600×750 | 500 | 150-200 | 80-240 | 275 | 55 | 15.8 | 2070×2000×1920 |
PE-600×900II | 600×900 | 500 | 65-160 | 50-180 | 250 | 55 | 17 | 2190×2206×2300 |
PE-750×1060 | 750×1060 | 630 | 80-140 | 110-320 | 250 | 110 | 29 | 2660×2430×2800 |
PE-800×1060 | 800×1060 | 640 | 130-190 | 130-330 | 250 | 110 | 29.8 | 2710×2430×2800 |
PE-830×1060 | 830×1060 | 650 | 160-220 | 150-336 | 250 | 110 | 30.7 | 2740×2430×2800 |
PE-870×1060 | 870×1060 | 660 | 200-260 | 190-336 | 250 | 110 | 31.5 | 2810×2430×2800 |
PE-900×1060 | 900×1060 | 685 | 230-290 | 230-390 | 250 | 110 | 33 | 2870×2420×2940 |
PE-900×1200 | 900×1200 | 750 | 95-165 | 220-450 | 200 | 110 | 52 | 3380×2870×3330 |
PE-1000×1200 | 1000×1200 | 850 | 195-265 | 315-500 | 200 | 110 | 55 | 3480×2876×3330 |
PE-1200×1500 | 1200×1500 | 1020 | 150-350 | 400-800 | 180 | 160 | 100.9 | 4200×3300×3500 |
PE-1500×1800 | 1500×1800 | 1200 | 220-350 | 500-1000 | 180 | 280 | 122 | 5160×3660×4248 |
PE-1800×2100 | 1800×2100 | 1500 | 300-400 | 600-1200 | 160 | 400 | 150.6 | 6210×4013×4716 |
PEX-150×750 | 150×750 | 120 | 18-48 | 41146 | 320 | 15 | 3.8 | 1200×1530×1060 |
PEX-250×750 | 250×750 | 210 | 25-60 | 13-35 | 330 | 30 | 5.5 | 1380×1750×1540 |
PEX-250×1000 | 250×1000 | 210 | 25-60 | 16-52 | 330 | 30 | 7 | 1560×1950×1390 |
PEX-250×1200 | 250×1200 | 210 | 25-60 | 20-61 | 330 | 37 | 9.7 | 2140×1660×1500 |
PEX-300×1300 | 300×1300 | 250 | 20-90 | 16-105 | 300 | 55 | 15.6 | 2720×1950×1600 |
The Low-carbon and Affordable Mining Machine Impact Crusher