features for crusher: 1.No dust leak 2.Stable performance and low noise 3.Stable performance 4.low operating costs

General introduction:

Kunding Crusher has absorbed advanced technology both at home and abroad. It is mainly used to reduce the run -of-mine ore down to a size suitable for transport and secondary crush. The maximum compressive strength of the materials to be crushed is 350MPA.

Usage

Crusher is widely used in mines, metallurgical extraction, building materials, road construction, railway building, hydro project, chemical industry etc.

Operating principle for crusher

The distinctive feature of this class of crusher is the two plates which open and shut like animal jaws. This machine is powered by the motor connected to belts. The two jaws are set at an acute angle to each other. When one jaw is pivoted periodically, it swings relatively to the other fixed jaw. Materials fed into the jaws are alternately nipped when the swing jaw moves close to the fixed one. When the swing jaw moves away from the fixed one, the crushed materials will be released to fall further into the crushing chamber. Eventually, the crushed materials fall from the discharge aperture.

Features and advantages for  crusher:

1 high reduction ratio

2 uniform granules size

3 simple structures

4 easy operation and maintenance

5 economical, energy-saving, and environment-friendly

6 long service life

7 high efficiency

8 various capacities

9 wide range of choice

10 anti-clogging design

Technical parameters of crusher

Model	Max. Feeding Size (mm)	Discharge Size (mm)	Capacity (t/h)	Motor Power (kw)	Overall Dimensions (mm)	Weight (t)
PE150×250	125	10-40	1-3	5.5	896×745×935	0.8
PE250×400	200	20-60	5-20	15	1150×1275×1240	2.8
PE400×600	350	40-100	15-60	30	1700×1732×1653	6.5
PE500×750	425	50-100	50-100	55	2035×1921×2000	10.3
PE600×900	480	65-160	60-130	75	2290×2206×2370	16.5
PE750×1060	630	80-140	80-180	110	2620×2302×3110	29
PE900×1200	750	95-165	140-260	110	3789×2826×3025	54.5
PE1000×1200	850	195-265	315-550	110	3335×3182×3025	57
PE1200×1500	1020	150-300	400-800	160-220	4200×3750×3820	100.9
PEX250×750	210	25-60	10-40	22	1667×1545×1020	5
PEX250×1000	210	25-60	15-50	30	1550×1964×1380	6.5
PEX250×1200	210	25-60	20-60	37	1560×2104×1415	7.7

* The Technical parameters above are only for your reference ,any change of model and size of the machine will not be informed .

(PE250X400) more than ten years of experience crusher