1. Secondary crushing 2. Crushing limestone, coal, salt, gypsum, alum3. Long lifetime 4. Reliable reputation

1. Application:

The Hammer Crusher is widely used in the industry of mining, building materials, chemical industry, metallurgy and fodder. The Hammer Crusher can secondary and fine crush materials in middle or less than middle hardness such as barite, limestone, terrazzo, silica sandstone, coal, coke, gypsum, aluminum sulfate, slag, etc

  

2. Working Principle

The main wroking part of hammer crusher is rotor with hammer, the rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotor to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by high-speed hammer. There is a screening palte under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until they reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.

 

3. Specifications  

Type	Specifications	Feeding size(mm)	Discharging size(mm)	Throughput(m3/h)	Motor		Total weight	Dimensions(L*W*H)(mm)
					electricity	kw
Hammer crusher	PCΦ400*300	<=200	<=25	5-10	4	11	0.8	900*670*860
	PCΦ600*400	<=250	<=30	10-22	4	22	1.5	1200*1050*1200
	PCΦ800*600	<=250	<=25	18-40	4	55	3.8	1310*1180*1310
	PCΦ1000*800	<=350	<=35	25-50	4	75	4.9	1600*1390*1575
	PCΦ1000*1000	<=300	<=35	30-55	6	132	8	1800*1590*1775
	PCΦ1250*1250	<=350	<=35	35-65	6	180	14	2060*1600*1890
	PCΦ1400*1400	<=350	<=35	50-100	6	280	32	2365*1870*2220
	PCΦ1600*1600	<=350	<=35	100-150	8	480	37.5	3050*2850*2800

stone hammer crusher with high fine crushing ratio