1. to crush stones and hard materials 2.the size of raw material is below 480mm 3.the power is 55kw 4.capacity:90-180t/h

              

Working Principle of Jaw Crusher:

The Power Motor transmits power through Belt, drives the Moving Jaw Plate do periodic motion to the Fixed Jaw Plate surround the Eccentric Shaft. The angle between Toggle Plate and Moving Jaw Plate increases when Moving Jaw Plate moves up. So the Moving Jaw Plate closes to the Fixed Jaw Plate. The stuff will be crushed in this process. The angle between Toggle Plate and Moving Jaw Plate decreases when Moving jaw Plate moves down, the Moving Jaw Plate moves away from Fixed Jaw Plate by the pulling of Rod and Spring, the crushed material will be discharged from the Discharge Opening.

Characteristics of Jaw Crusher:

high crushing ratio, even final granularity, simple structure, stable performance, easy maintenance, low operating cost

Technical Data of Jaw Crusher:

Model	Size of Feeder Opening (mm)	Max. Feeding Size (mm)	Capacity (t/h)	Motor Power (KW)	Overall Dimensions (mm)	Weight (t)
PE150×250	150×250	125	1-3	5.5	896×745×935	0.8
PE250×400	250×400	200	5-20	15	1430×1310×1340	3
PE400×600	400×600	350	15-60	30--37	1700×1732×1653	7
PE500×750	500×750	425	40-110	45--55	2035×1921×2000	12
PE600×900	600×900	480	90-180	55--75	2290×2206×2370	17
PE750×1060	750×1060	630	110-320	90--110	2655×2302×3110	29
PE900×1200	900×1200	750	220-450	110--132	3800×3166×3045	58
PEX250×750	250×750	210	15-30	22--30	1667×1545×1020	5
PEX250×1000	250×1000	210	15-50	30--37	1550×1964×1380	7
PEX250×1200	250×1200	210	20-60	37--45	2192×1900×1950	8.5

                                        

    

PE600*900 Jaw crusher