1.Low use and maintenance cost 2.High ratio of reduction 3.High reliablity 4.Feed size<400mm 5.Discharging size10-110mm

Double teeth roller crusher

Summarize

Double teeth roller crusher is suitable for compression strength less than 240Mpa, humidity less than 35% of the hard and soft materials , primary operations in the intermediate and coarse crushing.Such as coal, coke, petroleum coke, lime, silica, carbon, glass, asphalt, chemical raw materials or solid material with similar hardness. Features: low use and maintenance costs, high reliability, low dust , low noise.

 

Double teeth roller crusher has two abrasive rollers. The roller surface is divided into wolf teeth, ring teeth, straight strip teeth, big board teeth and others. The maximum feeding size is 1000mm ,the range of the discharge is 10-200mm. It is operated in the intermediate and coarse crushing which has few powder and lots of grains.

 

Such as for thermal power plants,coking plant crushing coal; breakingraw coal of coal mine; steel industry breakingcoke; petroleum coke breaking in coal chemical industryelectronics industry breaking silica;  carbon industry crushing carbon block solar industry breaking waste glass; Concrete industry crushing lime and asphalt; or in the similar occasions.

 

Working principle

Doubletoohed roller crusher is fixed with two wear-resistant alloy rollers. Their relative rotation generates high extrusion pressure which crushes the material. The material is entered into the space between the two rollers, suffered both extrusion and shear force.In the crowd rolling, cutting and grinding, it is crushed into the required size and then sent by the transport equipment.

double roller shatter equipment two teeth roller crusher