Ads by Google
Spring Cone Crusher
Application of Exway Spring Cone Crusher:
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compare with jaw crusher, cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc. Henan Exway series of cone crushers is widely applied in metallurgical, construction, road building, and phosphatic industry.
The Spring Safety System of Exway Spring Cone Crusher:
The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product.
Working Principle of Exway Spring Cone Crusher:
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is drived by motor through v-belts.The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the diacharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequantly the output size is determined.
Models of Spring Cone Crusher supplied by Henan Exway:
The standard type(PYB) is applied to medium crushing, the medium type(PYZ) is applied to medium or fine crushing and the short head type(PYD) is applied to fine crushing.
Technical Parameters of Exway Spring Cone Crusher:
| Type | Outside diameter Of crushing cone (mm) | Max feed size (mm) | The adjusting range of discharger (mm) | Crushing capacity (t/h) | Electric motor power (kw) | Speed of Eccentric shaft (r/min) | weight (T) | Overall dimensions (L×W×H)(mm) | |
| PYB | 600 | 600 | 65 | 15-25 | 40 | 30 | 356 | 5 | 2234×1370×1675 |
| PYD | 35 | 3-13 | 12-23 | 5.5 | 2234×1370×1675 | ||||
| PYB | 900 | 900 | 115 | 15-30 | 50-90 | 55 | 333 | 11.2 | 2692×1640×2350 |
| PYZ | 60 | 5-20 | 30-65 | 11.2 | 2692×1640×2350 | ||||
| PYD | 50 | 3-13 | 15-50 | 11.3 | 2692×1640×2350 | ||||
| PYB | 1200 | 1200 | 145 | 20-50 | 110-168 | 110 | 300 | 24.7 | 2790×1878×2844 |
| PYZ | 100 | 8-25 | 42-135 | 25 | 2790×1878×2844 | ||||
| PYD | 50 | 3-15 | 18-105 | 25.3 | 2790×1878×2844 | ||||
| PYB | 1750 | 1750 | 215 | 25-50 | 280-480 | 160 | 245 | 50.3 | 3910×2894×3809 |
| PYZ | 185 | 10-30 | 115-320 | 50.3 | 3910×2894×3809 | ||||
| PYD | 85 | 5-13 | 75-230 | 50.2 | 3910×2894×3809 | ||||
| PYB | 2200 | 2200 | 300 | 30-60 | 59-1000 | 280-260 | 220 | 80 | 4622×3302×4470 |
| PYZ | 230 | 10-30 | 200-580 | 80 | 4622×3302×4470 | ||||
| PYD | 100 | 5-15 | 120-340 | 81.4 | 4622×3302×4470 | ||||
Any change of Cone Crusher technical data shall not be advised addtionally.
High Efficiency Spring Cone Crusher