Ads by Google
2011high quality and low cost compound crusher
Introduction of compound crusher:
Compound crusher is a new product by optimized design combine domestic and international finely crushing technology. The performance has reached the international advanced level. Used to crush all kind of medium hardness ore, can be widely used in mining, metallurgical, refractory, cement, coal, glass, ceramics, electric power and other industries.
Mainly characteristics of compound crusher:
1.crushing ratio is big;
2.The production is higher, which is 1.4 times of the same domestic products;
3. high efficiency, energy saving;
4. wearing parts adopt high hardness and high toughness, multiple alloys material, life expectancy has increased 2-3 times.
5. the gap between hammer and counterattack board can be adjusted, thus meeting various materials’ crushing.
Operating principle of compound crusher:
Materials vertical fall into the high-speed running impeller from the upper section of the machine, under the effect of high-speed centrifugal force, produce high-speed impact and crush with another materials branching around the impeller in the form of umbrella, after impact, materials will form a vortex between impeller and chassis and crash into each other, friction to crush, discharging from the lower part directly, form close-circuit cycle repeatedly, by the control of screening equipment to achieve the requirement granularity.
Operating principle of compound crusher:
Materials vertical fall into the high-speed running impeller from the upper section of the machine, under the effect of high-speed centrifugal force, produce high-speed impact and crush with another materials branching around the impeller in the form of umbrella, after impact, materials will form a vortex between impeller and chassis and crash into each other, friction to crush, discharging from the lower part directly, form close-circuit cycle repeatedly, by the control of screening equipment to achieve the requirement granularity.
Mainly technical parameter of compound crusher:
Type | raw material size(mm) | Final product size(mm) | Productivity capability(t/h) | Spindles’ speed(r/min) | Motor power(kw) | Overall dimension (L×W×H)(mm) |
PFL-800 | <100 | <3-5 60~90% | 10~20 | 934 | 22 | 2100×1200×1700 |
PFL-1000 | <120 | <3-5 60~90% | 20~40 | 769 | 37 | 2600×1400×1900 |
PFL-1250 | <150 | <3-5 60~90% | 40-70 | 530 | 75 | 2800×1600×2100 |
PFL-1500 | <180 | <3-5 60~90% | 70-100 | 495 | 132 | 3100×1900×2200 |
PFL-1750 | <200 | <3-5 60~90% | 130-190 | 424 | 160 | 3710×2360×2390 |
PFL-2000 | <220 | <3-5 60~90% | 100-160 | 370 | 185 | 4100×2660×2620 |
2011high quality and low cost compound crusher