Drum chipper by the body's machine, knife roller, fluctuation, feed roller, conveyor belt, hydraulic
pressure system components. The machine adopts high strength steel welding and into,
is the whole machine of supporting the foundation. Knife roller are installed on the two or three,
four fly knife, use special manufacture of fly knife, through the pressure of bolt, fly knife fixed in the
knife roller. According to the thickness of the different raw materials by cutting, feeding roller
assembly can use hydraulic system in a certain range to fluctuate. Cutting down of material through
the screen mesh of qualified down at the bottom of the hole, the discharge, big piece of material
will be cutting machines.
Main technical parameter:
model | 215 | 216 | 218 | 2113 |
Feed size(mm) | 160*400 | 230*500 | 300*680 | 450*700 |
Quantity of knife(pcs) | 2 | 2 | 2 | 2 |
Speed of cutter shaft(r) | 592 | 590 | 650 | 500 |
maximum diameter(mm) | 160 | 230 | 300 | 450 |
Size of wood chip(mm) | 30 | 30 | 30 | 38 |
capacity(t) | 3-4 | 7-8 | 12-15 | 15-30 |
power(kw) | 45 | 55 | 110 | 200-250 |
Feed roller motor power (kw) | 2.2-3 | 3-4 | 4-5 | 7.5*2 |
Oil pump motor power (kw) | 1.5*1 | 1.5*1 | 1.5*1 | 3*1 |
weight(kg) | 2990 | 4070 | 7000 | 11840 |
Outer size(mm) | 1470*1550*970 | 1800*1900*1210 | 2200*2150*1500 | 3670*2517*2050 |
Drum chipper should be known by you