Increases Battery Power Extend Battwery Lfe Battery Charyer Faster Longer Discharger Prevents Sulfate Build

 

Jlstar Auto Battery desulfator

 

Connect the red connector to the positive battery terminal and the black connector to the negative battery terminal. It does not revive physically damaged batteries or batteries with dead cells.

 

 

It is recommended you do not remove the device from the battery.  Keeping the pulse on the battery permanently will prevent sulphate from developing inside the battery. The longer the device is connected to the battery, the greater the improvement.  A battery permanently charged and treated with the device will be at the top of its capacity for years.  If the device is removed, sulphates will again begin to accumulate and reduce battery capacity. 

 

 

CUTOFF VOLTAGE

 

Display Cut-off voltage

 

12V battery C12 11.0V

 

24V battery C24 22.0V

 

36V battery C36 33.0V

 

48V battery C48 44.0V

 

 

 

SPECIFICATION:

 

Auto-setting for 12V, 24V, 36V and 48V battery

 

Working Amp: 20mA max

 

Peak Amp: 2A max

 

Peak Voltage: 60-100V

 

Pulse Frequency: 10,000Hz

 

LED light indicates when pulse working

 

Cut-off amp: <5mA

 

 

Advantage of using the battery desulfator:

Extend the life of lead acid batteryRestore the full capacity of the batteryBattery charge fasterLonger dischargePrevents sulphate built-upAuto cut-off function to prevent over discharge of batteryAutomatic voltage selection: 12V, 24V, 36V and 48V

auto pulse battery desulfator