The Model 501K-1 is a Manual Engine Control Module, which has been designed to manually control the engine via a key switch on

Description

 

The Model 501K-1 is a Manual Engine Control Module, which has been designed to manually control the engine via a key switch on t front panel. The module is used to start and stop the engine, indicating fault conditions; automatically shutting down the engine and indicating the engine failure by LED giving true first up fault annunciation.

Deep Sea Controller provided as follows :

 

Model: DSE501K DSE5110 DSE5120

SPECIFICATION

DC Supply:

9 to 33 V Continuous.

Cranking Dropouts:

Able to survive voltage dips during cranking. This is achieved without the need for internal batteries.

Alternator Input Range:

15 - 305 V AC RMS

Alternator Input Frequency:

50 - 60 Hz at rated engine speed.

Magnetic Input Range:

0.5 V to +/- 80 V

Magnetic Input Frequency:2300Hz to 6000 Hz at rated engine speed.

Start Relay Output:

16 Amp DC at supply voltage.

Run Relay Output:

16 Amp DC at supply voltage.

Alarm Output:

1 Amp DC at supply voltage.

Dimensions:

72 X 72 X 118.5 (Excluding Key-switch)

Operating Temperature Range:

-30 to +70°C

Installation:

Front panel mounting via suitable cut-out. Retaining clips supplied. Cable connections via locking plug and socket type connectors.

Calibration:

Speed trip setting and meter calibration adjustment potentiometer are accessible from the rear of the module.

Generator Controller DSE501K For Manual Key Start