Lithium iron battery, replace energize battery Li/fe battery AA size, 2900mah AAA size, 1200mah

1. APPLICATION

The specification describes the requirements for the lithium iron disulfide primary cylindrical cell supplied by SHEN ZHEN MAGNATE NEW ENERGY LIMITED 

2 Kind of Products Specified

2.1   MODEL      LI-FE Primary Cylindrical battery  AAA

3 Basic Technical Parameter

1. Rated Opening Voltage                    1.5V

2.Internal Impedance                       ≤420mΩ

3.Rated capacity20mA                  1200mAh

4.Cut Off voltage                           0.8V

5.Working voltage                          ≥1.3V

6. Continuous Standard Load                600mA

7.Weight                                  7.2±0.5g

8.Operating Temperature range              -20 ~ +60

9.the temperature of storage condition        -20~25

10.Storage time                            10 years

3 Appearance and Structure Dimensions    attached detail drawing for reference

 The surface should be clean, without deformation, crack, discoloration and leakage

4 Appearance  

   Defects, such as scratches, flaws, dirty spots, rust, deformation, discoloration, leakage, etc., which damage commercial values shall not be presented.

5 Test Conditions

  Unless especial illumination, the test temperature should be between 25±2 and the relative humidity should be between 45~75%

6 Nominal Tests

Item	The way of test	The request of the result
Appearance and dimensions	See it by naked eye, measure it with a vernier caliper	Clean surface, no leak, no scull and mechanical damage, no transfiguration, no defect at the surface. The size of the battery can be seen in the attach drawing.
Weight	Quantify with scale (precision:0. 1g)	7.2±0.5g
Internal Impedance	Test the value of internal Impedance with the internal Impedance appearance	≤420mΩ
Capacity	Discharge in 20mA till the voltage is 0.8V	≥1200mAh
Rated operating voltage	Test by a multimeter	≥1.72V
Short cut Current	Battery parameters test apparatus	≥4A

SELL BATTERY AAA