The SS-10 SERIES is a family of miniaturized, high shock, solid-state, 4-channel recorders designed to acquire transducer data i
DESCRIPTIONThe SS-10 SERIES is a family of miniaturized, high shock, solid-state, 4-channel recorders designed to acquire transducer data in shock environments of up to 100,000 G's. The epoxy-encapsulated unit can be configured for a variety of transducer inputs to accommodate automotive crash testing, blast testing,mining applications, weapon testing, or testing in hostile field environments. Battery is included in the recorder ,Low power consumption allows instrumentation build-up weeks before the test and extends the time for data retrieval after the test. Data retrieval is accomplished using a personal computer. Software supplied with the recorder enables retrieval, storage, display, and printing of the data.FEATURES-- Small Size-- 1, 2, or 4 Analog Channels-- 12 Bit Resolution -- Low Power with 3.3 or 5 Volt Logic-- Battery is embeded in the recorder -- Single end or Differential Input-- 6-Pole Low Pass Filter-- High Sample Rate -- Pre-Trigger Data Retention-- Software Support-- Reusable-- Expandable Memory (to 256K Data Points)Recorder Type Model 11 Model 12 Model 14Number of Channels 1 2 4Standby Current 80 Microamps1 80 Microamps1 80 Microamps1Data Acquisition Current 70 Milliamps1 70 Milliamps1 80 Milliamps1Data Retention Current 80 Microamps1 80 Microamps1 80 Microamps11Typical currentFACTORY SELECTABLE OPTIONS--Storage Capacity Expandable to 256K Data Points (512K bytes)--Sample Rate / Filter Frequency (Limited Options)--3.3 Volt or 5.0 Volt Logic--Pre-Trigger Memory Size (Limited Options)--User Defined Package ShapeSERIES 10Recorder Model 11 Model 12 Model 14Sample Rate/Channel 250 KHz 1250 KHz 60 KHzLow Pass Filter Bandwidth 100 KHz 55 KHz 30 KHzMemory Size (Data Points) 128K 128K 128KPre Trigger Data/Channel 1819 Bytes 1934 Bytes 1988 BytesResistors (Pull-Down) 220K 220K 220KLogic (Volts) 3.3 3.3 3.3ELECTRICAL SPECIFICATIONSAmplifier Input ...........................................................................Single end or DifferentialInput Modes-----Pizoresistive ,ICP,Charge or VoltageLow-Pass Filter Type........................................................................... 6-Pole ButterworthDigitizer Amplitude Resolution.............................................................................. 12 Bits Storage Capacity.................................64K Data Points (128K Bytes) or 256K Data PointsTriggers ...................................................................................................... 3.3 or 5 Volt Supply Voltage................................................................................................ 6 to 10 VoltsSupply Voltage for External Sensor.............................. .............................. 3.3 or 5.0 voltsSupply Current for External Sensor Per Channel......................... 10 Milliamps (Maximum)PHYSICAL SPECIFICATIONSTemperature Range......................................................................................... 0 C to 75 CLength. ....................................................................................................... 2.36" (60.0mm)Diameter ............................................ ....................................................... 1.49" (38.0 mm)Weight ................................................. .................................................. 4 oz. (110 Grams)Maximum Shock Level........................................... ................................... 100,000 G'sNOTE: The Recorder is fully epoxy-encapsulated with the exception of the input terminals and the outputPC Board connector. The outer shell is stainless steel.DATA RETRIEVALSoftware is supplied to retrieve, store, display, examine, and print data. The software requires a 386 based PC computer configured with a mouse, VGA graphics, a hard disk, a high density floppy, and a minimum of 2 Meg expanded memory. A PostScript laser printer is highly recommended for data printout. Data analysis software is available.Data can be retrived through normal cable to connecting the recorder with PC directly .ULTRA-HIGH SHOCK RECORDER WITH SENSOR EMBEDEDULTRA-HIGH SHOCK RECORDER WITH SENSOR EMBEDEDSeries 20
ULTRA-HIGH SHOCK RECORDERSeries 30
Specification1. Channels: 42. Sampling rate: 1 KHz3. Memory:128 K/Ch4. A/D:12 Bit5. Recording time:133 s
Mini Ultra-High Shock Analog Recorder