2013 Newest High quality dmx controller for led
DALI6003
PWM output current : MAX 5A/CH | |||
DALI Digital control input, Dimming control LED module | |||
Addressing output channel | |||
Support Touch DIM function, and can be dimmed manually | |||
Dimming range is from 0-100% (LED Will start from 1% ) | |||
Used for DC Power supply | |||
Over-temperature protection | |||
Security level : 2 | |||
Three channels 12-24VDC constant voltage output |
Technical parameter:
Parameter | Min. | Max. |
Input voltage range | 12V | 24V |
Touch DIM AC input voltage range | 5V | 290V |
Touch DIM AC input voltage frequency range | 45HZ | 65HZ |
12-24 V DC Input current | 5A/CH | |
Output power | 0.1W | 3*120W |
Output voltage | 12V | 24V |
Output current | 5A/CH | |
Peak current | 6A/CH | |
Out casing temp | 70 | |
Surrounding temp | -20 | 50 |
Protection | Short circuit protection | |
Overload protection | ||
Overheat protection |
Size (mm):
Connecting:
Touch DIM function instructions:
1) Short press the Touch DIM switch (<0.5s) to control the lamp on or off2) Long press the Touch DIM switch (>0.5s) to dim the brightness of light;
The dimming direction will change every time after pressing switch
3) When the light being turned off, long press the Touch DIM switch can turn on the light and adjust it brightness according to the dimming direction4) The brightness adjustment range is 1%-100%, and the light can be turned off through short pressing when do the adjustment with long pressing Touch DIM switch5) Power off memory function, the power-down state before will be maintained when power on again
Product installation notes:
1) Remark: DALI and TouchDIM functions cannot be used simultaneously, which can be controlled respectively by using DALI controllers or the equipments with TouchDIM function2) Please read the connecting instruction picture before installation3) Please use the complete set of product according to the provided specification4) Please firstly pressure the cap end down in wire connecting process, then insert the thread of wire, and lastly check the wire is or not insert firmly5) In order to avoid the damage of the equipment, please check the connecting method is correct or not before connecting the power
DALI wiring diagrm:
TouchDIM wiring diagram:
Anything want to know from me, please feel very free to contact with.
Thank you for your time.
°C
2013 Newest High quality dmx controller for led