Led RGB RF remote strip controller
CY-Controller001 is a multi-function Wirelessing Touching RGB LED Controller. It adopts the most advanced PWM remote control technology ,can control all the full color LED lighting with four lines three circuits(common anode),with more than 640000 combination colors and 15 auto light changing modes.
I. Technical Parameters (remote)
1. Power supply:AAA battery*3pcs
2. Cover Material: ABS
3. Fabrication processing: multi color printing & UV varnish
II. Technical Parameters (controller)
1. Working voltage:DC12V/24V
2. Output control:3 circuits(R/G/B)
3. Control current: 6A/circuit
4. Connecting method: common anode
5. Wireless frequency: 433.92MHz
6. Receiving range: 20 meters
III. Functions of Keys
1. Key 1: on/off
2. Key 2: light changing mode (15 modes)
3. Key 3: color light/white light switching mode
4. Key 4: turn up (brightness/speed)
5. Key 5: turn down (brightness/speed)
IV. How to use
1. Press Key 1 to turn on/off in any state.
2. Press Key 2 to activate light changing mode, a new mode each press,15 modes in total.
3. Press Key 3 twice to activate color light mode, changing brightness by pressing Key 4/Key 5 or changing light color by touching the color ring.
4. Resume function. The previous settings will be resumed while power on again
Feature chart for Key 2
V. Matching code
Press Key 4 once within 3 seconds when power on again, the light will blink 3 times if matching is successful. Clearing Code Press Key 4 five times within 3 seconds when power on again, the light will blink 6 times if clearing is successful.
VI. Caution
Please don’t touch or press the color ring while loading the batteries to protect the sensitiveness. Please use the remote controller 3 seconds after the batteries are loaded. Please reload the batteries when you find the color ring is not sensitive.
VII. Connecting chart
VIII. Applications:
This kind of wireless touching RGB RF remote controller available to RGB strip light
Led RGB RF remote strip controller