INTRODUCTION:

This unit is assistant DMX controller.                                                                                                                                                      You can record some existing DMX program from DMX controller and playing in other place.                                                                                                                                                                                                      It has RS-232 function which will enable you to do some special work.

Operation:

1. DMX record:

Press and hold the RECORDER button 2 seconds, the corresponding LED will light up which means it works in DMX recording mode;

Then press the REC MODE button to select recording function: auto recording or manual recording then the corresponding led will light up.

Press AUTO button to choose the Program number which you want to record in then DMX signal can begin record if the input DMX signal is valid.

Auto function: it will record each scene till to 512 scenes.

Manual function: press the RECORDER button once to save one scene and so on you can up to 512 scenes.

2. Delete Program:

In DMX recording mode, press AUTO button to chose the program which you want to delete then you

Can push and hold AUTO and STOP in the mean time then LED will flash 3 times which means the program is deleted and STEP appear 000.

3. Delete All Programs:

In DMX recording mode, Press and hold up AUTO and STOP and PLAY button in the mean time then LED will flash 5 times which means it delete all programs.

Note: no recover for this function.

4. Save recorded program:

In DMX recording mode, push REC MODE enters AUTO function then AUTO Led will light up.

Then Press RECORDER button 2 seconds the RECORDER LED light off which means exit DMX recording mode and saves all recorded programs.

Running Program:

Press AUTO button 2 seconds the PROGRAM will shows “A” which means it will running all program. Otherwise it will runs one program from 1-8.

1. Auto running:

Press the PLAY button Auto LED light up which means it is in AUTO running then press SPEED button, to select running speed also you can adjust fade time by FADE button.

2. Sound running:

Press the PLAY button MUSIC LED light up which means it is in MUSIC running then you can adjust fade time by FADE button.

3. Manual running:

Press the STOP button, AUTO and MUSIC LED light off which means it is in manual running then Press the STEP button once the program run one step.

RS 232 command: (baud rate 115200)

SPECIFICATION:

Translate RS-232 signal to DMX signal.

Power input: DC9V, 500mA.

XLR interface and DB-9 interface.

Dimension: 210X120X65mm

Weight: 0.95kg

DMX Recorder Controller