Welcome to ECVERY
Wireless Touch Controller,DC12V/24V Wireless Touching Remote controller
Wireless Touch Controller,DC12V/24V Wireless Touching Remote controller
Supplier Info
[China Supplier]
Contact Person : Mr. He Horace
Tel : 086--0755-29031432
Fax : 086--0755-61641013
Product Detail
Specifications RF LED wireless touching controller Touch ring is high sensitive touch sensor work with finger touch 12V/24V

Wireless Touch Controller,DC12V/24V Wireless Touching Remote controller

Description

Work temperature: -20-60°C

Supply voltage:DC5V, 12V ,18V, 24V

Size::L90×W70×H28mm

Package size:150mmX76mmX51mm

Carton size:L496*W272*H308mm

Unit weight: 130g    

Unit gross weight: 165g    

Launch and receive frequency: 433.92Mhz

Output:Three CMOS drain open-circuit Output       

Connecting mode: common anode  common cathode

Static power: :<1W                      Output current:<4A(each channel)

Output power:5V:<60W,  12V:<144W,  24V:<288W

Model:BST-CON-TRF4B(SJ)-3CH-LV(L=5/6/12/24)

Summarization

led touch controller is a controller which can realize multistage dimmer. Can manual button control and also can use touch remote button control, touch remote is beautiful, generous, ultrathin, have color pulley touch screen, all sorts of design and color mode at a glance. Can a single point also can continuous touch to realize 60 kinds of color mode select, the static and dynamic mode can change freely. This new dimmer way is suit for every occasions, users can according to the needs, realize various dimmer requirements.

Remote Control Instruction

1, Touch remote have 64 touch key, each keys function below:

ON/OFF: you can turn on/off controller output at any time.

MODE: is dynamic sample color function keys, can choose different sample color changes, 4 kinds of dynamic change pattern in total. If in the static mode, when you press the M,then it can change to dynamic mode.

B/S+: the output signal brightness or speed control, every time you press this button, thebrightness or speed series add 1, altogether 100 levels.

B/S-: every time you press this button, the brightness or speed series minus 1;Color pulley buttons: static mode choose button, as many as 60 touch points;2, Touch remote power management: the remote control are without buttons state more than 20 seconds, remote will enter the save electricity state, only need to slightly shake once when use the remote;

Controller Instruction

1, Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2, There are six buttons altogether, and the key function as follows:

ON/OFF: in any state,you could turn on or turn off the output of controller;

MODE: is dynamic sample color function keys, can choose different sample color changes, 5 modes in total( 4 kinds of dynamic mode+ 1 kind of static mode(remote  choose));B+: Output signal brightness control, every time you press this button, the brightness or speed series add 1, altogether 25 levels;

B-: Output signal brightness control, every time you press this button, the brightness or speed series minus 1, altogether 25 levels;

S+: Output signal speed control, every time you press this button, the brightness or speed series add 1, altogether 25 levels;

S-: Output signal speed control, every time you press this button, the brightness or speed series minus 1, altogether 25 level;

Wireless Touch Controller,DC12V/24V Wireless Touching Remote controller

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.