6-key Film RF controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through wireless remote control. And according to the actual need of customers, it can carry out jumpy changing, gradual changing, stroboflash and other effects of change Working temperature | -20-60 | Supply voltage | DC5V, 12V~24V optional (specify the required voltage on orders) | 0utput | 3 channels | Connecting mode | common anode/cathode optional (specify the required voltage on orders) | External dimension | L90*W70*H28 mm | Packing size | L137*W80*H54mm | Net weight | 150g | Gross weight | 210g | Static power consumption | <1W | Output current | <4A(each channel) | Output power | 5V:<60W, 12V:<144W, 24V:<288W | No | Patterns | Remarks | No | Patterns | Remarks | 1 | Static red | Brightness is adjustable, Speed is unadjustable. | 12 | Red stroboflash | Speed and Brightness are adjustable | 2 | Static blue | 13 | Blue stroboflash | 3 | Static purple | 14 | Purple stroboflash | 4 | Static green | 15 | Green stroboflash | 5 | Static yellow | 16 | Yellow stroboflash | 6 | Static cyan | 17 | Cycan stroboflash | 7 | Static white | 18 | White stroboflash | 8 | Three-color jumpy changing | Speed and brightness are adjustable | 19 | R/B crossfade | Speed is adjustable, brightness is unadjustable |
Supply voltage of this product is DC12V~24V, never connect to others or AC220V. 2. Wireless Remote Control is powered by DC12V battery, if Stretch the antenna, it would Control better. 3. Lead wire should be connected correctly according to grade that connecting diagram offers. 4. This product is not to overload; 5. Warranty of this product is two years, but exclude the artificial situation of damaged or overload working. Problems | Possible cause | Solution | Lamp does not light after power | Power cord is not properly connected, or there is not output switching power supply | Connect the power cord properly or replay the power | Lamp power cord is not connected or short circuit | Connected lighting power cord | 2. After connecting some of the load the controller does not work | The connected load is too large,so that it has burned in some of the components of the controller | Replace parts of components or replace the controller |
|