DIP Switches

.MECHANICAL1Operation Force :6.0N Max2Stroke : 0.90mm3Operation Temp : -20704Storage Temp : -40 to 85.ELECTRICAL1Electrical Life : 2000 operations cycles per switch 24 VDC, 25mA2Non-Switching Rating : 100mA, 50VDC3Switching rating : 25mA, 24VDC4Contact resistance : (a) 50 mΩ max. at initial(b)100mΩmax. after life test5Insulation Resistance : 100MΩ, 500VDC6Dielectric Strength : 500VAC1 minute7Capacitance : 5pF max8Circuit : Single pole single throw.SOLDERING AND CLEANING PROCESSES1Keep all switch contacts in their OFF position for all operations2WAVW SOLDERING : Recommended Solder Temperature at 500°F (260) max. 5 seconds3HAND SOLDERING : Use a soldering iron of 30 watts, controlled at 608°F (320)approximately 2 seconds while applying solder 4CLEANING PROCESS : Flux clean using force rinse, high agitation or triple bath cleaning method. Freon TF or TE give excellent results. When vapor methods are used do not subject the switch to solvents at temperature above 125°F (51).MATERIALS1BASEENGINEERING PLASTICS,Black2COVERENGINEERING PLASTICS,Black3BUTTONENGINEERING PLASTICS,White 4TERMINALAlloy Copper, Gold plating.PACKING All DIP Switches are shipped in standard IC tubes with all poles in the OFF position.

DIP Switches