Welcome to ECVERY
professional intercom wireless voice door phone (1V3)
professional intercom wireless voice door phone (1V3)
Supplier Info
[China Supplier]
Contact Person : Ms. Chen Heidi
Tel : 86-769-33231809
Fax :
Product Detail
wireless voice door phone (1V3) 1.1V3 2.2.4G ISM Public Frequency Band:2402MHz-2479MHz

Professional intercom wireless voice door phone (1V3)

1.1V32.2.4G ISM Public Frequency Band:2402MHz-2479MHz

Wireless voice door phone(1V3)

Wireless voice intercom doorbell worked in 2.4G ISM band,with wireless call,wireless remote unlock,LED flash when caller and prompt Ding Dong,Wireless call from barrier free straight line 500M.The Doorbell adjust automatic FM and code technology,with very strong anti-interference ability and strong communication confidentiality,etc.Widely used in villa,office and inconvenient occasions of wiring

Functions:

1.2.4G ISM Public Frequency Band:2402MHz-2479MHz2.Transfer rate:250K,receiver sensitivity: less than -100.3.Launch power:less than 20dBm(100mw)4.AFH Adaptive Frequency Hopping technology, with wireless LAN and Bluetooth devices share 2.4G band to work at the same time.5.Ten numeric keys,One Call key and two LEDs:power indicator (red) and working indicator (green).6.Can match codes and set ID number7.AC110/220V or own battery;Standby current: 6.5mA;Operating current: 70mA.8.Communication distance: 500 meters for barrier free 

Details:

Wireless intercom doorbell is a set of multi-way intercom system,can be uesd in offices,workshops,homes,buildings ect.Using the 2.4G Communications Channel, full-duplex interoperability intercom, communication distance up to 500 meters above

Instructions:1,Boot:Connect the power or battery2,Standby :Receiving mode, the power light flashes every four seconds3,CALLA:First press the ID number, then the CALL button,  enter the main CALL with the red lightB:No response signal 4 seconds means no signal, loud "drops" tones, prompted no signal, ends CALL state.   Signal received, began to sound a beep tone:   A,If no answer, stop beep beep continued for 15 sound, but answer 1 minute,then end the CALL state.   B,If off-hook, beep tone stopped , enter the call state with the green light.   C:Indoor monitor keep a long red light and ring when receive the signal, Will beep 'ding-dong' stop ringing ,about 1 minute,       then entering standby.If off-hook, then stop ringing, the green light to enter the call state   D:Hook: you will hear a "beep". Host can hang up on the call of the process.   E:The indoor monitor is busy, then drops twice, busy prompt ,refund standby.   F:In the process of waiting for the off-hook, press CALL key again      1,If Indoor monitor in the ring , then it doesn't ring again, Outdoor monitor weight 15 beeps, re-timed one minute.      2,If the Indoor monitor not ring, the loud sound 'ding-dong', Outdoor monitorweight 15 beeps, re-timed one minute.

Please carefully get out machine from the packaging.We recommend that confirrm the carton have the items as below before you waste packaging:

Products

Quantity

Indoor monitor

3

Outdoor camera

1

Charger

1

Battery pack

2

Power adapter

2

Screw set

1group

Manual

1

Performance indicators:

Outdoor camera

Indoor monitor

Frequency Range

2402MHz----2483MHz

2402MHz----2483MHz

Current (waiting)

0.5mA

7mA

Full operating current (call)

80mA

60mA

Operating voltage

3.7V(outside DC5V)

3.7V

Launch power

100mW

100mW

Reference sensitivity

-100dBm

-100dBm

Standy time

3 months

170 hours

Work time

15 hours

15 hours

Operating Temperature Range

-20°C-50°C

-20°C-50°C

Audio frequency anamorphose

≤5%

≤5%

Intercom distance

barrier free straight line 400-500M

Floor intercom distance

1-3 Floor normal communications

basically in every corner

1-4 F, there maybe not communications in dead angle 

Remarks:1. The working time is counted in view of batteries in charging saturation of outdoor camera and indoor monitor.The actual work time will differ according to the quality of the battery and the degree of saturation

2. Standy time:Outdoor camera standby current is 0.5mA.Usual power consumption rarely. But the battery will have a static discharge,so after some period of time,Charge the battery.

Application occasions:

single-family household, control unlock1-3 floor Villa homeOfficeDeaf-mute family (with lights flashing reminder)

Product Instruction:

Outdoor camera

Outdoor camera adjust “Touch” button, Fashionable and beautifulElectrical unlocking way, electronically controlled lock, two kinds way:Normally open normally closed .Reserved for the external power supply plug, Can be accessed by an external power adapter (DC5V)Call voice clear and loud

professional intercom wireless voice door phone (1V3)

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.