Ads by Google
PVC Coated Steel Door(JX-PVC),Interior Inteior door
1 ) Door skin:0.5 mm galvanized steel,
Door frame:1.0mm steel
2) Knock down packing NF-108 frame
3 ) Steel door Jamb(knock down packing)
4) Filling with poly foam
5) Finish with pvc coating
6 ) Finger joint pine as door edge(steel edge is optional)
7) Hardwares:round lock (5-point lock optional),brass hinge (stainless hinge optional)
8)Avaliable Size: 2'6"/2'8"/2'10"/3'0"*79"*1 3/4"
800/900*2130*35mm
800/900*1980/1990*44.5mm.
Our PVC Interior Steel Door Factory Manufacture,Low Cost.
Steel Panel door with wooden edge
Specifications
1. Material
Door Skin
-------Hot dipped galvanized panels with double coated polyester
-------24gauge(0.6mm), 25gauge(0.55mm) or 26gauge(0.5mm)
------1. Primer: Epoxy resin, Finish: Polyester paint.
2. Not warp, crack or split like wood doors.
3. Both steel faces are hot dipped galvanized for resistance to rust & corrosion.
-------Factory primed semi gloss white Standard. 14 colors Vinyl coatings available.
Door Core
------ Polystyrene Foam Insulated
-------Fully polystyrene foam board is glued between the two steel facings to fill every air space and permanently bonded to provide outstanding insulation and stability.
-------CFC-free polyurethane foam injected core optional
Stiles and Rails
---- finger jointed pine or LVL wood
----1.2"thick stiles and rails
--- After drying and epidemic prevention treatment, the moisture index is less than 12%, provide structural strength.
--- Drive-in or square mortise edge preparation available
Frame
------Pre-hung Door unit optional, pine wood frame in 4 9/16*1 or 1/4*79 with weather stripping and sill, sweep.
-------Steel Frame availabe. It is in knock down packing without any welding, we provide fully installation components and tools.
Standard Size:
2'6"× 6'8"× 1-3/4" 2'8"× 6'8"× 1-3/4"
2'10"× 6'8"× 1-3/4" 3'0"× 6'8"× 1-3/4"
The Best Door Made In China!
Welcome Your Inquiries and Orders!
jinxun American Steel Door(JX-M03)