Specification 1220*2440*18,16,9,5(mm) | ||||||
Physical performance test | Quter inspection & size test | |||||
Items | Result | Items | Tolerance of nominal dimensions | Result | ||
Density(g/m3) | 740 | OK | Length(mm) | ±2mm/m, | 1830 | OK |
Density tolerance(%) | ±0.1 | OK | ||||
Bending Strength(Mpa) | 33.3 | OK | Width(mm) | ±2mm/m | 3660 | OK |
Internal Bond(Mpa) | 0.94 | A | ||||
Thickness Swelling(%) | 4.4 | OK | Thickness(mm) | ±0.2mm | 16 | OK |
Moinsture Content(%) | 5.4 | OK | Squareness (difference of two diagonal size) | ±2mm/m | 0mm/m | OK |
Formaldehyde Emission (Mg/100g) | 22.44 | B | ||||
Modules of elasticity in bending (Mpa) | 2980 | Edge straightness | ±1.5mm/m | 0 mm/m | OK | |
Screw Holding(N) | 1506 | |||||
1285 |
UV FILLED SIX TIMES ON SURFACE !!!
1. It is dense, flat, stiff, has no knots and easily to be machined. 2. It does not have an easily recognisable surface grain., it is made up of fine particles. 3. It can be easily painted to produce a smooth surface. 4. It have low "tear out, " which means that when sawed, the end has a smooth cut instead of a jagged edge. This also means that a coat of primer and a couple of coats of paint take well, leaving an attractive, finished surface unlike other composite wood products. 5. MDF have good Density: Profile with high bending strength and modulus of elasticity, dimension stability.
6. The MDF also with low formaldehyde content, smooth stable surface of MDF make it an ideal substrate for surfacing with decorative paper or PVC foils and direct painting.
glass sliding door