1. Leesho offers a complete line of Metal Twist Drill Bits, such as straight shank, taper shank, etc; 2. Process: fully ground;

Main technical conditions of twist drill

 

Dimensions

1. Drill diameter - The values indicated in the relevant dimensional standards apply in respect of the diameter of twist drills.

Test point: On the lands at the cornersTesting equipment: micrometer

             Test point of the drill diameter

2. Tapering of diameter - The diameter of twist drills usually reduces from the drill tip towards the shank in the area of the flutes.

Test values: The taper on diameter amounts to 0.02 to 0.08mm over a length of 100mm.Test point: At the outside diameter on the land.Testing equipment: micrometer and indicating measuring instruments.

3. Parallel shank - Tolerance for shank diameter f11, Tolerance for roundness and parallelism 0.02mm for the shank length.

4. Length - The tolerance of length for the total length corresponds for the degree of accuracy "very coarse" according to DIN standards. The flute lengths given in the relevant dimensional stands are minimum dimensions.

5. Point angle

Test value: σ=118°; σ=135°Test point: At the cutting edgesTesting equipment: Universal bevel protractor indicating measuring instruments.

             Point angle

Materials and hardness

Materials - M2, M35, M42, 9341, 4341, 4241, etcHardness - HSS HRC63-66; HSSCo HRC64-68Test point: On outside diameter on the land or adjacent relieved land.Test equipment: Hardness Tester.

Marking

Twist drills with diameter 3mm and upwards shall be marked with:

Diameter;Material: (HSS, HSSCo);Name or mark of manufacturer.Additional and/or differing marking by agreement.

Web Thinning

Without thinningSuitable for drill of general purpose.Thanks to thin web thickness, web thinning is not need.This without web thinning type is applied to design of drills for mild steel, alloy steels, cast iron, stainless steel, titanium, inconel, etc. and conventional cutting conditions.

Type C thinning (DIN1412 FORM C, SPLIT POINT)Because split point enables good centering when drilling and breaks the chips, chip removals is easy.Suitable for drill design in high hardened tough materials, i.e, heat treated steel, titanium alloy, stainless steel, incoroy inconel, nimonic, etc.

NOTE:

We can supply many kinds of drill bits, such as hss twist drill, masonry drill, wood working drill bit, etcNot all products are currently listed on our website. If you don't see the specific product you are looking for, please contact us for assistance.

Fully Ground HSS Straight Shank Twist Drill Bit