Parameter Name | Unit | MG97 | ||||
Overall Dimensions | mm | 65-215 | ||||
Drilling Depth | m | 80 | ||||
Power | Diesel motor | Cummins | ||||
Rated output and Speed | Km/rpm | 110/2200 | ||||
Hydraulic pressure | MPa | 20 | ||||
Hydraulic flow | L/min | 95,95,48 | ||||
Hydraulic tank capacity | L | 320 | ||||
Diesel tank capacity | L | 180 | ||||
Rotary Drive | Work mode | Rotate, impact | ||||
Type | Krupp HB45A | |||||
Max. Torque | N.m | 9700 | ||||
Rotating Speeding | r/min | 110 | ||||
Percussion Frequency | min-1 | 1200 | 1800 | 2500 | ||
Percussion Torque | Nm | 590 | 400 | 340 | ||
Range of Drilling Operation | Pitch angle of the Crawler | -11° +15° | ||||
Swing angle of the big boom | ||||||
Swing angle of the slewing frame | ±95° | |||||
Lifting angle of the big boom | -21° ~ +54° | |||||
Pitch angle of the feed | -6° ~ +115° | |||||
Swing angle of the feed mast | -81° ~ +11.5° | |||||
Slide stroke of the feed mast | mm | 1000 | ||||
Feed Mechanism | Mode of feed | |||||
Impulsion force | kN | 53 | ||||
Pipe extract speed | kN | 71 | ||||
Max. Impulsion Speed | m/min | 40.8 | ||||
Max. Pipe extract speed | m/min | 30.6 | ||||
Feed Stroke | mm | 4100 | ||||
Traveling Mechanism | Swing angle of the crawler | -11° ~ +45° | ||||
Grade Ability | ° | 27 | ||||
Traveling Speed | Km/h | 3.08 | ||||
Ground contact pressure | Mpa | 0.06 | ||||
Winch Capacity | N | 10000 | ||||
Drill Rod Tripper and Chuck | Chuck diameter | mm | 65 ~ 215 | |||
Chucking force | kN | 190 | ||||
Tripping Torque | N.m | 25400 | ||||
Scientific and strict management ensures the quality of the products. High quality standard units facilitate reliable and stable operation of the drilling rig. Science and advanced matching improve equipment durability and economy. |
Fully Hydraulic Crawler Ground Anchor Drilling Rigs