Ads by Google
1.PRODUCT DETAILS
The drilling rig is mainly mechanical driven. Most of the operating mechanism is hydraulic driven and the other part is mechanical driven.
In addition to the main operating mode of rotary drilling by rotary table and mud. The drilling rig can be adapted other drilling if it is equipped drilling tool that is suitable for drilling through various strata such as clay, sand and matrix etc.
At the beginning of boring, pressuring mechanism may be used for drill tool to effect pressuring drilling, thus promoting the efficiency of shallow -hole drilling. With the increased depth, when the weight of the drill tool is greater than the pressure required applying to the drill tool, the main hoisting system should be used to carry out reduced pressure drilling.
The drilling rig is equipped with a main hoist, a secondary hoist and a tool hoist. The main hoist is used for lifting or lowering of the drill tool, lowering of the well pipe. The secondary hoist is used for driving percussive earth excavator or other coring tool and sand reel to extract sands sample or core and silt in the well. The tool hoist is used for elevating the movable table and other tools to reduce physical labor.
This drilling rig features in best maneuver ability, compact construction, high integrity, economical transportation, simple operation, reliable transmission,etc.Other applications as follow:
1.It is equipped with the breakout-gun cylinder. After loosening the first turn of thread of the lock joint with the aid of breakout-gun cylinder, the drill pipe can be rotated in counter-clockwise direction by rotary table to reduce greatly the labor intensity and prolong service life of the component parts.
2.The drilling rig is equipped a mud pump of changing- cylinder for construction.
3.The drilling rig is equipped four jacks to reduce physical labor and improved installation efficiency.
4.To upgrade the versatility in application, standard parts and components.
The drilling rig may be used for drilling in quaternary period stratum and matrix. Main applications are as follows:
(1) Exploration and investigation of hydro-geological condition.
(2) Water well drilling for agriculture irrigation, industry and national defense.
(3) Ventilation of underground tunnel. It can also be used selectively in building engineering
Main Technical Parameter of S600 water well drilling rig
Maximal Diameter of Turntable(mm) | Φ650 |
Drilling Depth(m) | 600 |
Turntable Speed(r/min) | 22,59,86,126 |
Torque(kN.m) | 13.7, 5.1, 3.5, 2.3 |
Effective Height of Rig(m) | 14 |
Load of Rig(kN) | 385 |
Overall Dimensions (L x M x H)(m) | Towing State: 10*2.8*4.1 |
Working State: 5.65×4.15×16.7 | |
Weight(t) | 12 |
lOil box:offer oil to the hydraulic system. lTransmission:control the speed of drill. lControl rod:use to raise the drill rig,down the drill rig and the speed of the hoisting lMotor: offer the power for the transmission systemlHoisting:raise the drill rig,down the drill rig lUp tower tank:stand up tower lHoisting:raise the drill rig,down the drill rig lTurntable:drive the drilling pipe to drill lSquare hole: the drill pipe drill into
lShackle cylinder:screw off the first buckle,between the drill pipe,the link is the screw,it must screw off use the shackle cylinder lDrive shaft:drive the turntable to turn
Mud Pump
Mud Pump Model:BW850/2 | |
Diameter of Cylinder | 150mm |
Stroke of Piston | 180mm |
Flow Rate | 850L/min 600L/min |
Pressure of the Pump | 2Mpa 3Mpa |
Input Mud Pipe | Φ125mm |
Output Mud Pipe | Φ64mm |
Diesel Generator | |
Power | 136 HP |
Brand | Cummins |
600m depth direct and reverse circulation water well drilling rig S600