tumble dryer: 1.small space required 2.low energy consumpution 3.high thernak efficiency 4.compact structure

Tumble dryer machine:

Main purposes: tumble dryer machine is used dry humidity particle materials, such as yellow sand used by industrial, variety of sand which used in foundry industry, Blast furnace slag which used in cement industry of building materials, Small particle size clay. According to requirements of the water in the products after dryer, The water content 1-0.5% or less can be achieved after the process.

Tumble dryer machine working principle:

The special three cylinder structure makes the inner cylinder and middle cylinder being surrounded by the outer cylinder to form a self-contained thermal insulation system, the radiated heat from surface of inner and middle cylinder assist heat the material in the outer cylinder. But the outer cylinder is at the low temperature end, so the heat dissipation area and heat losses are reduced significantly.

Tumble dryer machine  technical parameters:

Specification(mm)	Φ2.0*4	Φ2.5*5	Φ3.0*6	Φ3.6*8
Diameter(mm)	2000	2500	3000	3600
Length(m)	4	5	6	8
Cubage(m3)	12.6	24.5	42.4	81.4
Modality	Auger-type push
Fill rate	10-20%
Materials	Refractory steel, stainless steel
Temperature	≤700°C
Evaporation Intensity	20-80Kg/m3.h
Way to heat	Heat transfer directly
Source of heat	Coal, oil, electricity, gas, biofuel
Rev	4-10r/min
Drive of power	5.5 KW	11 KW	15 KW	22 KW
Corollary equipment	Dehydrate machine, transfers machine, abruption machine, dedusting machine, induced draft fan and so on

Tumble dryer machine:

the outer canister can keep thermal insulation for inner canisterthe temperature of outer canister is low and the thermal is small.the entire length is shorter than single canister dryer oven about 50%. The occupied space is smalllow energy consumption and high thermal efficiencygood effect of drying materialseasy to achieve automatic control and use less operator.

 Application of dryer machine:

Rotary dryer is used for drying material with humidity or granularity in the industries of mineral dressing,building material,metallurgy and chemical.It can be used for drying many kinds of material such as:limestone slag,coal power,slag,and clay stone.And it is made from rotary body,lifting blade,driving device,supporting device and sealing ring.

 

Characteristics of dryer machine:

The dryer has advantages of reasonable structure,high efficiency,low energy consumption,convenient for transmission,and reliable operation.Therefore,the consumption of the coal and the electricity is lower than the common ones,while the production capacity is 10-15%higher

The operation is very simple and reliable

For rthis reason and it is used widly.

Tumble dryer machine picture:

small space covered tumble dryer machine