productivity:3.8~106NM3/h dew point:-40~60 inlet temperature: 40 working cycle: 10~20min working pressure: 0.6~0.8MPa

Specifications:

Capacity: 3.8 ~ 106 NM3 / hrDew Point: - 40 ~ - 60 Degree CelsiusInlet Temperature: 40 Degree CelsiusWorking Cycle: 10 ~ 20 minWorking Pressure: 0.6 ~ 0.8 MPa

No-heat regeneration dryer is according to pressure swing adsorption principle.  With the method of countercurrent no-heat regeneration, the dust and the water in the compression air are been moved and the air is been dryed, so we get the clear and dry air.

Because it is easily to operate ,convenient to maintenance, Low energy-consuming and long life to be used,ect. It is widely used in petroleum, chemical industry, light and textile industry, textile, power, instrument, medical, transportation, power meters and pneumatic components, etc.

specifications	The rated capacity	work pressure	inlet temperature	Dew point	Regeneration gas loss	Working cycle	Envelop dimensions
No-heat  W1ZG-3/8	3.8NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	700mm*500mm*1650mm
No-heat  W1ZG-6/8	6.5NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	900mm*740mm*1850mm
No-heat  W1ZG-10/8	10.8NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	1350mm*1000mm*2000mm
No-heat  W1ZG-20/8	23NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	1550mm*1150mm*2100mm
No-heat  W1ZG-30/8	33NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	1720mm*1200mm*2250mm
No-heat  W1ZG-40/8	45NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	1820mm*1250mm*2520mm
No-heat  W1ZG-60/8	65NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	1950mm*1360mm*2700mm
No-heat  W1ZG-80/8	85NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	2200mm*1500mm*2800mm
No-heat  W1ZG-100/8	106NM³/h	0.6~0.8MPa	≤40°c	≤40~60°c	12%	10-20min	2500mm*1650mm*2900mm

Heatless Regenerative Dryer