hot airflow sawdust dryer machine 1.strong drying effect 2.easy operation 3.low dust,eco-environmental 4.stable performance

Top quality hot airflow sawdust dryer machine  

Brief introduction of hot airflow wood sawdust dryer

 

Hot airflow type wood sawdust dryer machine, also called pipeline type drier, shows the feature of high hot airflow speed, fully mixing of airflow and materials, big drying strength, lower dust and bigger drying capacity.

Requirment on the input materials: 

Particular material as rice shell, saw dust, and ground wood chip, tree branch, wood bits, etc,.(Diameter is less than 3mm; Length, 5mm). Moisture in the raw mateials of less than 40% can be drying one time to meet the requirement for coal bar production.

 

 

Technical parameters:

 

Model	Power	Capacity	Inlet size	Dimension
HJ-5	4kw	180-300kg/h	≤5mm	8.5*1.5*3.5m
HJ-6	5.5kw	500-700kg/h	≤5mm	13.6*1.5*3.5m
HJ-7	7.5kw	900-1600kg/h	≤5mm	18.0*3.0*5.0m

Operation rules of hot airflow sawdust dryer:

After installation, start the blower, check the direction it runs and see if the suction at the material inlet is normal. Tie up a bag both ends are open around the outlet of the dust catcher.Feed the material to be dried to the hopper. Remove large grain in the material before drying, which will benefit drying speed.Put fuel into the furnace and light it, start the blower. When the air temperature at the outlet of the blower get to 100°C, begin feeding and drying.Large piece of the material at dregs-outlet must be removed, which is favorable to feeding.

top quality hot airflow sawdust dryer machine 0086 15237108072