Ads by Google
Top quality air flow wood sawdust dryer
Hot airflow type dryer, also called pipeline type drier, adopting twice circulate heating system, is our newly advanced drying equipments, and shows the features of automatic feeding, high hot air flow speed, fully mixing of airflow and materials, big drying strength, lower dust and bigger drying capacity. Moisture in the raw material of less than 50% can be dried one time to meet the requirement for coal bar production, which greatly reduced the labor intensity compared with commonly used drier.
Features of hot air flow wood sawdust dryer
The wood dryer is suitable for drying materials of moisture 20-70%.Wood dryer is suitable for drying materials like sawdust, rice hull, milling wheat straw, corn stalks and so on.The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper.The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going through the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock.This wood dryer reduces the moisture to 8-12%.Clients can change the angle of dryer base on the production field.It is only to control the moisture of raw material at a reasonable range that can make good result of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.Technical Data:
Type | Power | Capacity | Inlet Size | Dimension |
HJ-IV | 18.5kw | 800-1000kg/h | <5mm | 18.0*3.2*5.0m |
HJ-III | 7.5KW | 400-600KG/H | ≤5mm | 15.0×3.0×3.5m |
HJ-II | 4KW | 180-300KG/H | ≤5mm | 8.5×1.5×3.5m |
Should you be interested in any of our HJ series sawdust dryer, please kindly email us for detailed information.
top quality air flow type sawdust dryer