Airflow Dryer
Main Technical Parameters:
Model | HGJ-I | HGJ-II | HGJ-III |
Capacity | 200-300 | 400-600 | 700-1000 |
Diameter of materials | <1mm & < 5mm | <1mm & < 5mm | <1mm & < 5mm |
Temperature of hot air | 180-250°C | 180-250°C | 180-250°C |
Moisture of materials | 20-30% | 30-60% | 30-60% |
Moisture of materials after drying | 8-12% | 8-12% | 8-12% |
Net/Gross Weight | 1000/1100 KG | 2040/2260KG | 2850/3080 KG |
I. Brief Introduction:
Sawdust Dryer is suitable for dry the grain, sawdust, etc small granular materials. It can dry the raw materials quickly and with higher capacity.
II. Technical Details
1. For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. This Air Current Type Dryer can reduce the humidity of wood materials below 10% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.
2. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintainace, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.
3. Regarding HGJ-315,it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-10% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.
5. All of round places can be adjusted to any angle of 360 centigrade degree according to operation request. Clients can change the angle of dryers base on the production field.
AirFlow Dryer Professional Manufacture ---TongLi Manufacture