Ads by Google
Stainless steel refrigeration air dryer
1. Our Advantages :
Refrigerated dryer Compressed air purification equipments series
1 | Well-designed all over the machine, on basic of spare 10% margin, guarantee the stability of device dew point |
2 | We take international brand cool compressor, working stability with low noise , low consume and reliability |
3 | We select brand of DANFOSS in refrigeration |
4 | The main material we use is stainless steel in case of air flow through it , others we use coating soleplates |
5 | Avoid condense air polluted |
6 | Divided the efficient gas liquid outlet,avoid the moisture steam again,sewage thoroughly |
7 | Condenser adopt to plate heat exchanger,high difference of water temperature&low water consumption |
8 | Can choice linkage interface and function of dew point detection |
9 | Have active function for various of fault and dispose |
10 | Electronic drainage system which hard to jam, it can guarantee machine set drainage effect works in best |
11 | Integrated design in compact structure .convent to operate and maintain. Easy to install |
2. Refrigerated dryer Compressed air purification equipments working conditions
1 | Power mode | 3Ph/380V/50Hz ( electable ) |
2 | Design pressure | 1.0Mpa |
3 | Rated working pressure | 0.7Mpa |
4 | Allowable working pressure | 0.4-0.95Mpa(peculiar specification can accept) |
5 | System pressure drop | ≤0.018Mpa |
6 | Rated inlet temperature | ≤80°C |
7 | Ambient temperature | ≤32°C(pressure 0.2-0.4Mpa) |
8 | Inlet oil content | ≤5ppm |
9 | Outlet pressure dewpoint | 2-10°C |
3. For more information of other models ,please feel free to contact us,customised requirements acceptable.
Our factory produce both wind and water refrigerated air dryers,each have normal temperature and high temperature 2 types for your choice.
Wind Refrigerated Compressed Air Dryers : Treatment : 0.7- 110 Nm³/min
Water Refrigerated Compressed Air Dryers : Treatment : 17- 410 Nm³/min
Adsorption air dryer
Stainless steel refrigeration air dryer