Ads by Google
Saw Dust Drying Machine /hot wind stove dryer Machine Description:
Saw dust Air steam dryer also knows as flash dryer/air flow drying, it is applied for the solid raw material which has flow ability. We have the special design for drying wet moisture fiber raw material saw dust .Application Initial moisture below 50% .The whole saw dust drying machine is consists of Hot wind Stove ,Material feeder ,Drying Pipe .Drying Cyclone .Cyclone separator ,Fan ,Control system ,This saw dust drying system could drying the damp saw dust into optimal moisture 8-14% for making wood briquette and wood pellet production .
Principle of Work
The damp/wet fiber raw material like saw dust from saw mill or after crushing wood particle through the material feeder conveyer to the drying pipe .and flue gas or heated fresh air enter into the drier at the same time.They are mixed fully.The damp saw dust are passing the drying pipe .Then the wet moisture will be separate from the material . The dried finished products discharged from cyclone separator, the whole system could be operated at Positive pressure air pressure of the fan .our special design could have excellent drying result; we have more than 20 years working experience.
Drying Temperature Technical Consultation and Test
The inlet hot air temperature could be 100- 180 °C.
The outlet hot air temperature could be 80-100°C
Mostly the temperature will be depends on the damp/wet initial moisture and special character .
Application:1,Drying the damp /wet saw dust into optimal moisture (8-14%)for making wood briquette .
2,Drying the damp/wet saw dust into optimal moisture (8-14%)for making biomass wood pellets
3,Drying the wet wood flour into best moisture(below 3%) for making WPC products
Feature:1. Energy saving2. Wide use for wood briquette production/For wood pellet production/For WPC production 3. Good drying effect4. Low noise 5,Less burning fuel
Saw Dust Drying Machine Main Technical Parameter
Model | XW-h-300 |
Application Initial Moisture | 30-50% |
Final Drying Moisture | 8-14% |
Drying Pipe diameter | 300mm |
Drying Capacity | 200-300 kg/h |
Fan Power | 7.5kw |
Material Feeder Power | 0.75kw |
Power Supply | 380 V 50hz 3 phase |
Machine Weight | 900Kg |
Delivery Time | 15 Working Days |
Model | XW-h-350 |
Application Initial Moisture | 30-50% |
Final Drying Moisture | 8-14% |
Drying Pipe diameter | 350mm |
Drying Capacity | 400-600kg/h |
Fan Power | 11kw |
Power supply | 380 V 50hz 3 phase |
Weight(kg) | 1200Kg |
Delivery Time | 15 working days |
Model | Xw-h-450 |
Application Initial Moisture | 30-50% |
Final Drying Moisture | 8-14% |
Drying Pipe diameter | 450mm |
Drying Capacity | 800-1200kg/h |
Fan Power | 18.5kw |
Power Supply | 380 V 50hz 3 phase |
Weight(kg) | 2000Kg |
Delivery Time | 15 working days |
Skype ID:wangzhihao79
Cellphone:0086-18661692081
Trade Manager:cn1000344148
QQ:417510485
2012 best design hot wind stove dryer/saw dust flow dryer for wood pellet production