Welcome to ECVERY
Dry wall composite insulator/ Dry wall composite bushing
Dry wall composite insulator/ Dry wall composite bushing
Supplier Info
[China Supplier]
Contact Person : Mr. Zheng Heyman
Tel : 86-577-55770567
Fax : 86-577-62991338
Product Detail
Dry wall composite bushing 1.Type: FGCW series 2.Rated voltage: 10KV,35KV,66KV and 110KV 3.Rated current: 200-1600A

Introduction

Composite dry wall bushing is a new model wall through bushing,which used newmodel insulating material in

 the internal insultion, and used highperformance,high temperature silicon sulfide hydrocarbon in theexternal 

insulation,it accords with the trend in development of nonoiland minaturiz ation of the power department,it is satisfied with the requirement of the urban & rural electrical net rebuild of the newgeneration high voltage 

products.

Normal service conditions:

1.The ambient air temperature is no higher than +40 degree. no lower than -40 degree.

2.The altitude above sea level does not exceed 1500m

3.AC Power frequency does not exceed 100Hz

4.Maximum wind speed does not exceed 35m/s

5.The earthquake intensity does not exceed 7 degrees 

Main technical parameters

Product Model

Rated voltage(kV)

Rated current(A)

Lightning impulse withstand voltage(peak)(kV)

P.F 1min wet withslend voltage(virtual value)(kV)

Bending break load(N)

Permitted bending load(N)

FCGW-10/220~630

10

200~630

75

30

1250

625

FCGW-12/630~3150

12

630~3150

75

30

1250

625

FCGW-20/630~3150

20

630~3150

150

60

1250

625

FCGW-35/630~3150

35

630~3150

200

80

1250

625

Dry wall composite insulator/ Dry wall composite bushing

Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.